Nissan Frontier D22. Instruction — part 677
OUTER COMPONENT PARTS
EM-15
[KA24DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
WBIA0099E
EM-16
[KA24DE]
OIL PAN
OIL PAN
PFP:11110
Components
EBS00GS7
Removal
EBS00GS8
1.
Remove the engine under cover.
2.
Drain the engine oil. Refer to
.
3.
Remove the front suspension member. Refer to
FSU-10, "Front Suspension Parts"
.
4.
Remove the oil pan bolts in the numerical order as shown.
5.
Remove the oil pan using Tool as shown.
a.
Insert Tool between the cylinder block and oil pan, and separate
the oil pan from the engine block by tapping (1) with a plastic
hammer as shown.
●
Be careful not to damage the aluminum mating surface.
●
Do not insert a screwdriver, which may damage the oil pan
flange.
b.
Slide the Tool by tapping on the side (2) of the Tool with a plastic
hammer as shown.
6.
Pull the oil pan out from the front side.
WBIA0174E
AEM497
PBIC0002E
OIL PAN
EM-17
[KA24DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
Installation
EBS00GS9
1.
Use a scraper to remove the old liquid gasket from the mating
surface of the oil pan.
●
Remove all traces of the liquid gasket from the mating surface
of the cylinder block.
2.
Apply a continuous bead of liquid gasket to the mating surface
of the oil pan.
●
Use Genuine Anaerobic Liquid Gasket or equivalent. Refer to
MA-12, "RECOMMENDED FLUIDS AND LUBRICANTS"
.
●
Apply the liquid gasket to the groove on the oil pan mating
surface.
●
Allow a 7 mm (0.28 in) clearance around the bolt holes.
●
Be sure the bead of liquid gasket has a diameter of 3.5 - 4.5
mm (0.138 - 0.177 in).
●
Installation must be done within 5 minutes after applying the
liquid gasket.
AEM299
AEM300
SEM015E
AEM301
EM-18
[KA24DE]
OIL PAN
3.
Install the oil pan.
●
Wait at least 30 minutes before refilling the engine oil.
●
Tighten the oil pan bolts to specification in numerical order as
shown.
4.
Install the remaining parts in the reverse order of removal.
Oil pan bolts
: 6.4 - 7.5 N·m (0.65 - 0.76 kg-m,
56 - 66 in-lb)
AEM498
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст