Nissan Frontier D22. Instruction — part 125
REAR INTERNAL GEAR AND FORWARD CLUTCH HUB
AT-469
[RE4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
6.
Install thrust washer onto rear internal gear.
●
Apply petroleum jelly to thrust washer.
●
Securely insert pawls of thrust washer into holes in rear
internal gear.
7.
Position forward clutch hub in rear internal gear.
8.
After installing, check to assure that forward clutch hub rotates
clockwise.
SAT906A
SAT907A
SAT905A
AT-470
[RE4R01A]
BAND SERVO PISTON ASSEMBLY
BAND SERVO PISTON ASSEMBLY
PFP:31615
Components
ECS007QC
Disassembly
ECS007QD
1.
Block one oil hole in O/D servo piston retainer and the center
hole in O/D band servo piston.
2.
Apply compressed air to the other oil hole in piston retainer to
remove O/D band servo piston from retainer.
3.
Remove D-ring from O/D band servo piston.
4.
Remove band servo piston assembly from servo piston retainer
by pushing it forward.
LCIA0277E
SAT909A
SAT910A
BAND SERVO PISTON ASSEMBLY
AT-471
[RE4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
5.
Place piston stem end on a wooden block. While pushing servo
piston spring retainer down, remove E-ring.
6.
Remove servo piston spring retainer, return spring C and piston
stem from band servo piston.
7.
Remove E-ring from band servo piston.
8.
Remove servo cushion spring retainer from band servo piston.
9.
Remove D-rings from band servo piston.
10. Remove O-rings from servo piston retainer.
SAT911A
SAT912A
SAT913A
SAT914A
AT-472
[RE4R01A]
BAND SERVO PISTON ASSEMBLY
Inspection
ECS007QE
PISTONS, RETAINERS AND PISTON STEM
●
Check frictional surfaces for abnormal wear or damage.
RETURN SPRINGS
●
Check for deformation or damage. Measure free length and
outer diameter.
Assembly
ECS007QF
1.
Install O-rings onto servo piston retainer.
●
Apply ATF to O-rings.
●
Pay attention to position of each O-ring.
2.
Install servo cushion spring retainer onto band servo piston.
SAT915A
Inspection standard
: Refer to
SAT916AA
SAT917A
SAT918A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст