Nissan Rogue. Instruction — part 97
AV-380
< REMOVAL AND INSTALLATION >
[NAVIGATION WITH BOSE]
AROUND VIEW MONITOR CONTROL UNIT
AROUND VIEW MONITOR CONTROL UNIT
Exploded View
INFOID:0000000011277032
Removal and Installation
INFOID:0000000011277033
REMOVAL
CAUTION:
Before replacing around view monitor control unit, save or print current vehicle specification with
CONSULT configuration before replacement. Refer to
AV-279, "ADDITIONAL SERVICE WHEN
REPLACING AROUND VIEW MONITOR CONTROL UNIT : Work Procedure"
.
1. Remove glove box assembly. Refer to
IP-24, "Removal and Installation"
2. Remove around view monitor control unit screws.
3. Disconnect the harness connector from the around view monitor control unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Replace the around view monitor control unit if it has been dropped or sustained an impact.
• When replacing around view monitor control unit, you must perform "After Replace ECU" with CON-
SULT. Refer to
AV-279, "ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CON-
.
NOTE:
Perform camera image calibration. Refer to
AV-284, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
AWNIA3694ZZ
1.
Around view monitor control unit A. Harness connector
AV
FRONT CAMERA
AV-381
< REMOVAL AND INSTALLATION >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT CAMERA
Exploded View
INFOID:0000000011277034
Removal and Installation
INFOID:0000000011277035
REMOVAL
1. Remove the front grille. Refer to
EXT-23, "Removal and Installation"
2. Remove screws and front camera.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to
AV-284, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
1.
Front grille
2.
Front camera
ALOIA0238ZZ
AV-382
< REMOVAL AND INSTALLATION >
[NAVIGATION WITH BOSE]
SIDE CAMERA
SIDE CAMERA
Removal and Installation
INFOID:0000000011277036
REMOVAL
1. Remove door mirror rear finisher (2). Refer to
2. Remove screws (A) and side camera (1).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Perform camera image calibration (if equipped with around view camera). Refer to
BRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Description"
ALLIA1383ZZ
AV
REAR VIEW CAMERA
AV-383
< REMOVAL AND INSTALLATION >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000011277037
REMOVAL
1. Remove the back door outer finisher. Refer to
EXT-51, "Removal and Installation"
.
2. Disconnect washer tubes (1,3) and air tube (2) (if equipped).
3. Release pawl (B), disconnect harness connector (A) from rear
view camera and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3329ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст