Nissan Rogue. Instruction — part 1057
COMPONENT PARTS
SEC-7
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000011278438
A. View right of steering column.
No.
Component
Function
1.
Combination meter
Combination meter transmits the vehicle speed signal to BCM via CAN
communication.
BCM also receives the vehicle speed signal from ABS actuator and elec-
tric unit (control unit) via CAN communication. BCM compares both sig-
nals to detect the vehicle speed.
Security indicator lamp is located on combination meter.
Security indicator lamp blinks when ignition switch is in any position other
than ON to warn that NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS
[NVIS (NATS)] is on board.
Refer to
MWI-6, "METER SYSTEM : Component Parts Location"
.
2.
Push-button ignition switch
Push-button ignition switch has push switch inside which detects that
push-button ignition switch is pressed, and then transmits ON/OFF signal
to BCM. BCM changes the ignition switch position with the operation of
push-button ignition switch. BCM maintains the ignition switch position
status while push-button ignition switch is not operated.
3.
NATS antenna amp.
Refer to
.
4.
Inside key antenna (instrument center)
Inside key antenna (instrument center) detects whether Intelligent Key is
inside the vehicle or not, and then transmits the signal to the BCM.
Refer to
DLK-21, "Inside Key Antenna (Instrument Center)"
5.
Horn
Horn is operated when the panic button on the Intelligent Key is pressed
or the alarm is activated.
6.
Transmission range switch
Refer to
TM-14, "CVT CONTROL SYSTEM : Transmission Range
.
ALKIA3683ZZ
2015 Rogue NAM
SEC-8
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
COMPONENT PARTS
7.
IPDM E/R
Refer to
PCS-6, "Component Parts Location"
8.
Stop lamp switch
Refer to
9.
BCM
BCM controls INTELLIGENT KEY SYSTEM (ENGINE START FUNC-
TION), NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS [NVIS (NATS)]
and VEHICLE SECURITY SYSTEM.
BCM performs the ID verification between BCM and Intelligent Key when
the Intelligent Key is carried into the detection area of inside key antenna,
and push-button ignition switch is pressed. If the ID verification result is
OK, ignition switch operation is available.
Then, when the ignition switch is turned ON, BCM performs ID verification
between BCM and ECM. If the ID verification result is OK, ECM can start
engine.
Refer to
BCS-7, "BODY CONTROL SYSTEM : Component Parts Loca-
for detailed installation location.
10.
CVT shift selector
Refer to
TM-20, "SHIFT LOCK SYSTEM : Component Parts Location"
.
11.
Main power window and door lock/unlock
switch (Front power window and door lock/
unlock switch RH similar)
Door lock and unlock switch is integrated into the main power window and
door lock/unlock switch.
Door lock and unlock switch transmits door lock/unlock operation signal to
BCM.
Refer to
PWC-7, "Main Power Window And Door Lock/Unlock Switch"
.
12.
Outside key antenna LH
Outside key antenna (LH) detects whether Intelligent Key is outside the
vehicle or not, and then transmits the signal to the BCM.
Refer to
DLK-22, "Outside Key Antenna (LH)"
.
13.
Front door lock assembly LH
Door key cylinder switch is integrated into front door lock assembly (driver
side).
Door key cylinder switch detects door LOCK/UNLOCK operation using
mechanical key, and then transmits the operation signal to BCM.
Refer to
DLK-24, "Front Door Lock Assembly (LH)"
14.
Front door switch LH
Door switch detects door open/close condition and then transmits ON/
OFF signal to BCM.
15.
Rear door switch LH (rear door switch RH
similar)
Door switch detects door open/close condition and then transmits ON/
OFF signal to BCM.
16.
Outside key antenna RH
Outside key antenna (RH) detects whether Intelligent Key is outside the
vehicle or not, and then transmits the signal to the BCM.
Refer to
DLK-22, "Outside Key Antenna (RH)"
.
17.
Front door switch RH
Door switch detects door open/close condition and then transmits ON/
OFF signal to BCM.
18.
Inside key antenna (console)
Inside key antenna (console) detects whether Intelligent Key is inside the
vehicle or not, and then transmits the signal to the BCM.
Refer to
DLK-22, "Inside Key Antenna (Console)"
19.
Back door lock assembly
Back door lock actuator locks/unlocks the back door latch assembly.
20.
Outside key antenna (rear bumper)
Outside key antenna (Rear bumper) detects whether Intelligent Key is out-
side the vehicle or not, and then transmits the signal to the BCM.
Refer to
DLK-22, "Outside Key Antenna (Rear Bumper)"
.
No.
Component
Function
2015 Rogue NAM
COMPONENT PARTS
SEC-9
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
NATS Antenna Amp.
INFOID:0000000011278439
The ID verification is performed between BCM and transponder inte-
grated into Intelligent Key via NATS antenna amp. when Intelligent
Key backside is contacted to push-button ignition switch in case that
Intelligent Key battery is discharged. If the ID verification result is
OK, the operation of ignition switch is available.
JMKIB1434ZZ
2015 Rogue NAM
SEC-10
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM
SYSTEM
INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION
INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION : System Diagram
INFOID:0000000011278441
INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION : System Description
INFOID:0000000011278442
SYSTEM DESCRIPTION
• The engine start function of Intelligent Key system makes it possible to start and stop the engine without
using the key, based on the electronic ID verification. The electronic ID verification is performed between
BCM and Intelligent Key when the push-button ignition switch is pressed while the Intelligent Key is within
the detection area of inside key antenna.
NOTE:
The driver should carry the Intelligent Key at all times.
• Intelligent Key has 2 IDs [Intelligent Key ID and NVIS (NATS) ID]. It can perform the door lock/unlock opera-
tion and the push-button ignition switch operation when the registered Intelligent Key is carried.
• When Intelligent Key battery is discharged, engine can be started by operating push-button ignition switch
after contacting Intelligent Key backside to push-button ignition switch. At that time, the NVIS (NATS) ID ver-
ification is performed.
• If the ID is successfully verified, when push-button ignition switch is pressed, the engine can be started.
• Up to 4 Intelligent Keys can be registered (Including the standard Intelligent Key) upon request from the cus-
tomer.
ALKIA3671GB
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст