Nissan Rogue. Instruction — part 673
UNDER COVER
EXT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
UNDER COVER
Exploded View
INFOID:0000000011280047
ENGINE UNDER COVER
ENGINE UNDER COVER : Removal and Installation
INFOID:0000000011280048
REMOVAL
1. Remove engine under cover clips.
2. Remove engine under cover.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing engine under covers, check that clips are securely placed in body panel holes.
FLOOR UNDER COVER
FLOOR UNDER COVER : Removal and Installation
INFOID:0000000011280049
REMOVAL
1.
Floor under cover (RH)
2.
Engine under cover
3.
Floor under cover (LH)
ALKIA3342ZZ
EXT-38
< REMOVAL AND INSTALLATION >
UNDER COVER
1. Remove floor under cover clip (B) and nuts (A).
2. Remove floor under cover (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing floor under covers, check that clips are securely placed in body panel holes.
ALKIA3398ZZ
ROOF SIDE MOLDING
EXT-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
ROOF SIDE MOLDING
Exploded View
INFOID:0000000011280050
Removal and Installation
INFOID:0000000011280051
REMOVAL
Release roof side molding (1) using suitable tool (A) then remove.
: Metal clip
CAUTION:
Apply protective tape (B) around the roof side molding.
INSPECTION
1.
Roof side molding
2.
Back door hinge cover
Metal clip
Pawl
ALKIA3360ZZ
AWKIA2883ZZ
EXT-40
< REMOVAL AND INSTALLATION >
ROOF SIDE MOLDING
Remove any metal clips (A) that remain on roof posts (1) by cutting
each side (
) of the clip.
CAUTION:
Make sure all old clips have been removed from posts on roof
panel.
NOTE:
It is only necessary to cut and remove metal clips (A) that remain on
the roof posts (1). Metal clips that remain in roof side molding can be
reused if not damaged.
INSTALLATION
1. Rotate each roof post 90 degrees (A) using a suitable tool and
remove.
2. Insert a new metal clip in any locations on the roof side molding where missing.
CAUTION:
When installing, make sure all clips are on roof side molding.
3. Install the roof side molding to the roof panel.
4. Tap firmly on the roof side molding to lock each of the remaining
clips into place on the remaining posts.
CAUTION:
Make sure all clips and pawls are firmly pressed into place.
ALKIA3009ZZ
ALKIA3010ZZ
ALKIA3012ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст