Nissan Rogue. Instruction — part 102
BCS-14
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM
• BCM is in the low power consumption mode and performs the low power consumption control when all of the
BCM sleep conditions are fulfilled with CAN sleep condition.
Sleep condition
WAKE-UP OPERATION
• BCM changes from the low power consumption mode to the CAN communication sleep mode when the any
of the BCM wake-up conditions are fulfilled. Only the control with BCM is activated.
• BCM transmits the sleep wake-up signal (wake up) to each unit when any of the CAN wake-up conditions
are fulfilled. It changes from the low power consumption mode or the CAN communication sleep mode to the
normal mode.
• Each unit starts the transmission of CAN communication with the sleep wake-up signal. In addition, the com-
bination meter transmits the wake-up signal to BCM via CAN communication to report the CAN communica-
tion start.
SHIPPING MODE CONTROL SYSTEM
CAN sleep condition
BCM sleep condition
• Receiving the sleep-ready signal (ready) from all units
• Ignition switch: OFF
• Vehicle security system alarm and panic alarm: No operation
• Warning lamp: No operation
• Intelligent Key system buzzer: No operation
• Brake switch: OFF
• Turn signal indicator lamp: No operation
• Exterior lamp: OFF
• Door lock status: No change
• CONSULT communication status: No communication
• Meter display signal: Non-transmission
• Door switch status: No change
• Rear window defogger: OFF
• Interior room lamp battery saver: Time out
• RAP system: OFF
• Push-button ignition switch (push switch) illumination: OFF
• NATS: No operation
• Tire pressure monitoring system: Stop
BCM wake-up condition
CAN wake-up condition
• Front door lock assembly LH (key cylinder switch): Lock or unlock
• Door lock switch: OFF
→ON
• Door unlock switch: OFF
→ON
• Back door opener switch: OFF
→ON
• Receiving the sleep-ready signal (Not-ready) from any units
• Push-button ignition switch (push switch): OFF
→ON
• Hazard switch: OFF
→ON
• PASSING switch: OFF
→ON, ON→OFF
• TAIL LAMP switch: OFF
→ON
• Front door switch LH: OFF
→ON, ON→OFF
• Front door switch RH: OFF
→ ON, ON → OFF
• Back door switch: OFF
→ON, ON→OFF
• Front outside handle LH request switch: OFF
→ON
• Front outside handle RH request switch: OFF
→ON
• Back door request switch: OFF
→ON
• Stop lamp switch signal: ON
BCS
SYSTEM
BCS-15
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
SHIPPING MODE CONTROL SYSTEM : System Description
INFOID:0000000011280183
SYSTEM DIAGRAM
DESCRIPTION
• BCM switches the status (shipping mode or normal mode) by itself according to the extended storage fuse
switch condition, and transmits shipping mode status signal to combination meter and each unit via CAN
communication.
• When shipping mode function operates, each control unit does not detect DTCs.
• BCM control functions are limited in shipping mode. Refer to
• The combination meter displays extended storage fuse warning message* on the information display, and
turns the turn signal indicator lamp (LH/RH) ON, when BCM is in shipping mode.
*: When shipping mode function operates, “SHIPPING MODE ON PUSH STORAGE FUSE” is displayed.
JMMIA1403GB
BCS-16
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000011280184
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
DOOR LOCK
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEADLAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Intelligent Key system
INTELLIGENT KEY
×
×
×
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
Back door open
TRUNK
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
Signal buffer system
SIGNAL BUFFER
×
Air conditioner
AIR CONDITIONER
×
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-17
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)
INFOID:0000000011280185
SELF DIAGNOSTIC RESULT
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
REAR DEFOGGER
REAR DEFOGGER : CONSULT Function (BCM - REAR DEFOGGER)
INFOID:0000000011280186
DATA MONITOR
Monitor Item [Unit]
Description
REQ SW-DR [On/Off]
Indicates condition of door request switch LH.
REQ SW-AS [On/Off]
Indicates condition of door request switch RH.
REQ SW-BD/TR [On/Off]
Indicates condition of back door request switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of back door switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
Test Item
Description
DOOR LOCK
This test is able to check door lock operation [ALL LOCK/ALL UNLK].
DOOR LOCK INDICATOR
This test is able to check door lock indication [On/Off].
Support Item
Setting
Description
DOOR LOCK-UNLOCK SET
On*
Automatic door locks function ON.
Off
Automatic door locks function OFF.
AUTO UNLOCK TYPE
MODE2
Driver door only unlocks automatically.
MODE1*
All doors unlock automatically.
AUTO LOCK FUNCTION
MODE3
This mode is not used.
MODE2
Doors lock automatically when shifted out of P (park).
MODE1*
Doors lock automatically when vehicle speed reaches 24 km/h (15 mph).
Off
—
AUTO UNLOCK FUNCTION
MODE3
This mode is not used.
MODE2
Doors unlock automatically when shifted into P (park).
MODE1*
Doors unlock automatically when ignition is switched from ON to OFF.
Off
—
SIGNATURE LIGHT SETTING
On*
Signature light mode function is ON.
Off
Signature light mode function if OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст