Nissan Rogue. Instruction — part 1232
WT-4
< PRECAUTION >
PRECAUTIONS
• Do not apply oil to nut and bolt threads.
• When tightening the valve cap there is a risk of damaging the valve cap if a tool is used. Tighten by hand.
PREPARATION
WT-5
< PREPARATION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000011280484
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tool
INFOID:0000000011280485
Tool number
(TechMate No.)
Tool name
Description
—
(J-50190)
Signal Tech II
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS
transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
• Test remote keyless entry keyfob relative
signal strength
• Check Intelligent Key relative signal
strength
• Confirm vehicle Intelligent Key antenna sig-
nal strength
• Compatible with future sensors
• Equipped with a display
KV48105501
(J-45295-A)
Transmitter activation tool
• Activate TPMS transmitter IDs
• Compatible with future sensors
• Equipped with a display (KV48105501 only)
ALEIA0131ZZ
ALEIA0183ZZ
Tool name
Description
Power tool
Loosening nuts, screws and bolts
PIIB1407E
WT-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000011280486
AWEIA0372ZZ
A.
Combination meter
B.
Engine room (RH)
C. Left front wheel assembly
D. Behind instrument panel (LH)
E.
Left rear wheel assembly
(FWD models)
F.
Left rear wheel assembly
(AWD models)
G.
Wheel
No.
Component parts
Function
1.
Combination meter
The combination meter receives tire pressure status from the BCM via
CAN communication. The combination meter will display the low tire pres-
sure warning lamp when a low tire pressure or system malfunction is de-
tected by the BCM.
2.
Information display (in combination meter)
COMPONENT PARTS
WT-7
< SYSTEM DESCRIPTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
BCM
INFOID:0000000011280487
• Tire pressure receiver is integrated in BCM.
• The tire pressure receiver receives the tire pressure signal trans-
mitted by the tire pressure sensor in each wheel.
• The BCM reads the tire pressure signal received by tire pressure
receiver, and controls the low tire pressure warning lamp opera-
tions. It also has a judgment function to detect a system malfunc-
tion.
Information Display
INFOID:0000000011280488
A low tire pressure warning or flat tire warning is shown on the vehi-
cle information display when they are transmitted from the BCM to
combination meter via CAN communication.
3.
ABS actuator and electric unit (control unit)
Mainly transmits the following signals to BCM via CAN communication:
• Wheel sensor signal (ABS)
4.
Front wheel sensor LH (RH similar)
Refer to
BRC-9, "Wheel Sensor and Sensor Rotor"
.
5.
BCM
Refer to
6.
Rear wheel sensor LH [FWD models (RH similar)] Refer to
BRC-9, "Wheel Sensor and Sensor Rotor"
.
7.
Rear wheel sensor LH [AWD models (RH similar)] Refer to
BRC-9, "Wheel Sensor and Sensor Rotor"
.
8.
Tire pressure sensor
Refer to
No.
Component parts
Function
AWKIA2844ZZ
AWEIA0349ZZ
Condition
Vehicle information display
Ignition switch OFF
Not indicated
Ignition switch ON
Low tire pressure warning lamp remains ON after blinking for one
minute. Tire Pressure Monitoring System (TPMS) malfunction.
Not indicated
Ignition switch ON
Low tire pressure warning lamp remains ON (low tire pressure).
Indicated
Ignition switch ON
Flat tire warning.
Indicated
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст