Nissan Rogue. Instruction — part 299
DLK-38
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
System Diagram
INFOID:0000000011278791
System Description
INFOID:0000000011278792
The automatic back door system performs the automatic open/close operation of the back door by operating
the automatic back door switch, the automatic back door close switch, the back door opener switch, and Intel-
ligent Key.
AUTOMATIC BACK DOOR OPEN/CLOSE FUNCTION
• In the case of the back door fully closed, operate the automatic back door switch, Intelligent Key or back
door opener switch with the back door unlock. The back door closure motor releases the latch, then the spin-
dle motor opens the back door to the fully open position. The closure motor reverses to the neutral position
simultaneously.
• In the case of the back door fully open, operate the automatic back door switch, Intelligent Key or automatic
back door close switch. The spindle motor closes the back door to the half-latch position, then the back door
closure motor to the full latch position. Then, the closure motor reverses to the neutral position.
AUTOMATIC OPEN/CLOSE TEMPORARY STOP FUNCTION
ALKIA3502GB
2015 Rogue NAM
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
DLK-39
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Automatic open/close temporary stop function temporarily stops the open/close operation by operating back
door opener switch during automatic open/close operation or by turning automatic back door main switch OFF.
Back Door Opener Switch Operation
• Automatic open/close operation stops when back door opener switch is operated during automatic open/
close operation.
• Back door performs automatic open operation in an open direction when back door opener switch is oper-
ated again during automatic open/close temporary stop function operation.
• Back door performs automatic close operation in a close direction when automatic back door close switch is
operated during automatic open/close temporary stop function operation.
• Automatic operation is performed again, in the direction that automatic back door switch operated before
stopping, when automatic back door switch or Intelligent Key button is operated during automatic open/close
temporary stop function operation.
Automatic Back Door Main Switch Operation
• While automatic back door main switch is ON, automatic open/close operation stops when automatic back
door main switch is turned OFF during automatic open/close operation.
• While automatic back door main switch is OFF, automatic open/close operation stops when automatic back
door main switch is turned ON then turned OFF during automatic open/close operation.
• Back door performs automatic open operation in an open direction when back door opener switch is oper-
ated again during auto open/close temporary stop function operation.
• Back door performs automatic close operation in a close direction when automatic back door close switch is
operated during automatic open/close temporary stop function operation.
• Automatic operation is performed again, in the direction that automatic back door switch operated before
stopping, when automatic back door switch or Intelligent Key button is operated during automatic open/close
temporary stop function operation.
BACK DOOR OPEN POSITION SETTING FUNCTION
Back door open position setting function enables a user to set stop position for automatic open operation.
Setting Procedure
Stop position for back door open position setting function can be set by the following procedure:
1. Instructionly move the back door to a stop setting position.
2. Press and hold the automatic back door close switch for 3 seconds while maintaining the back door posi-
tion.
3. The switching is complete when the buzzer sounds (pattern E).
4. Fully close the back door.
Cancellation Procedure
Setting of back door open position setting function can be cancelled by the following procedure:
1. Instructionly move the back door to a fully open position.
2. Press and hold the automatic back door close switch for 3 seconds.
3. The switching is complete when the buzzer sounds (pattern E).
4. Fully close the back door.
BACK DOOR AUTO CLOSURE FUNCTION
Open Function
When back door opener switch is pressed and automatic back door main switch in the OFF position, BCM
transmits the back door open request signal to automatic back door control module via CAN communication,
and automatic back door control module opens back door lock assembly.
Closure Function
When the back door is closed to the half-latch position, the motor drives to rotate the latch lever and pulls it in
from half latched to fully latched and automatically closes the door. Then, the closure motor reverses to the
neutral position.
WARNING FUNCTION
The warning function is as follows and gives the user warning information using automatic back door warning
chime and hazard warning lamps:
Chime Operation Condition
2015 Rogue NAM
DLK-40
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
ANTI-PINCH FUNCTION
During auto open operation, if an object is detected by encoder pulse in the door's path, a warning chime
sounds and the back door operates in the reverse direction to prevent pinching.
During auto close operation, if an object is detected by the touch sensors and encoder pulse in the door's
path, a warning chime sounds and the back door operates in the open direction until it is fully open.
Operation Condition
Pattern
Time
Description
A
0.75 sec.
Operation start announcement.
Anti-pinch operation start announcement.
B
Pi---
2.0 sec.
• Closure function operates when auto-
matic back door main switch is in OFF
position.
• During the closure operation, when
touch sensor detects any trapped foreign
material, the back door stops halfway.
C
Pi------••••••
Back door fully closed or vehi-
cle is stopped
The conditions are not satisfied in the fully
open position or during the operation, and
then the operation continues.
D
During open/close operation
During operation announcement.
E
2.5 sec.
• Calibration of automatic back door posi-
tion information is complete.
• Back door open position setting proce-
dure is complete.
JMKIA1862ZZ
JMKIA1863ZZ
JMKIA6517ZZ
Detection method
Encoder pulse
Touch sensor
Applicable operation
Open/close operation
Close operation
Operation when
any trapped for-
eign material is de-
tected.
Stop the vehi-
cle.
Chime sounds (pattern A)
and reverse operation.
• Buzzer sounds (pattern A) and the back door stops in
the fully-open position after reverse operation.
• During closure (close) operation (at main switch OFF):
Closure [open (neutral position return)] operation.
Running the ve-
hicle.
No reverse operation (chime
sounds, pattern C).
• The back door reverses a certain amount, and then it
reverses automatically to perform the auto close oper-
ation.
• During closure (close) operation (at main switch ON):
Closure (open) operation.
Non-reverse area.
• Just after starting the mo-
tor operation.
• Full range of closure oper-
ation.
• Driving
• Back door open operation.
• Closure [open (return the latch to the neutral position)].
2015 Rogue NAM
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
DLK-41
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR OPEN/CLOSE OPERATION CONDITION
*: If the registered Intelligent Key is used, the operation can be performed even if the back door is in the LOCK position.
CONTROL IF NOT WITHIN THE OPERATION CONDITIONS DURING THE OPERATION
If the back door is not within the operation conditions during the operation, the automatic back door control
module performs the control as follows:
Switch operation during reverse op-
eration.
Receive
Number of allowable reverse opera-
tions.
Perform the automatic open/close temporary stop function after 2 reverse operations re-
gardless of the operation direction.
Detection method
Encoder pulse
Touch sensor
Automatic back door switch
Intelligent Key
Automat-
ic back
door close
switch
Back door opener
switch
Operating direction
Fully closed
→ Open
Fully open
→Closed
Fully
closed
→
Open
Fully open
→ Closed
Fully open
→ Closed
Fully closed
→ Open
Main switch
—
—
—
—
ON
ON
Ignition position
ON/ACC/
LOCK
OFF
—
—
—
ON/ACC/
LOCK
OFF
Shift selector lever
P position
—
—
—
—
—
P position
—
Vehicle speed
0 km/h
Back door lock condition
—
—
—
—
—
Unlock*
Touch sensor
Normal
Power supply
(Automatic power back
door control module)
Approx. 11 V or more
Item
(Condition)
Back door condition
Vehicle stop condition (open operation)
• IGN ON and shift P (Park) position
→IGN ON
and other than P (Park) position.
The operation is continued.
Operation condition release during the opera-
tion start announcement condition.
Automatic back door function does not operate.
Vehicle speed
(0 km/h
→ More than 0 km/h)
Open operation
Operation stop [Back door fully closed or chime
sounds until the vehicle stops (pattern C)].
Close operation
The operation is continued [chime sounds (pattern C)
until back door fully closed].
Touch sensor
(Normal
→ Open)
Open operation
The operation is continued (If the pinch is detected af-
ter that, the system switches to the automatic open/
close temporary stop function).
Close operation
Automatic open/close temporary stop function.
Closure (close) opera-
tion
Closure (open) operation and chime sounds (pattern
B).
Closure [open (return
the latch to the neutral
position)]
The operation is continued.
Operation time
(More than approx. 180 sec.)
Inhibit automatic back door operation.
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст