Nissan Rogue. Instruction — part 813
FRONT DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
7. Remove front door finisher bolt (A).
8. Insert suitable tool (A) between front door finisher and door
panel to release clips and pawl, starting from the bottom and
working to the top.
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing front door finisher, check that clips and pawls are securely placed in door panel
holes.
NOTE:
When main power window and door lock/unlock switch or power window door lock/unlock switch RH is
removed or replaced, it is necessary to perform the initialization procedure. Refer to
.
ALJIA1338ZZ
ALJIA1341ZZ
INT-18
< REMOVAL AND INSTALLATION >
REAR DOOR FINISHER
REAR DOOR FINISHER
Exploded View
INFOID:0000000011277474
Removal and Installation
INFOID:0000000011277475
REMOVAL
1. Remove screw cover (1).
1.
Rear door
2.
Rear power window switch fin-
isher
3.
Rear door screw cover
4.
Rear door inside handle finisher 5.
Rear door finisher
A.
Tether clip
B.
Tether
Pawl
Clip
AWJIA1312ZZ
ALJIA1377ZZ
REAR DOOR FINISHER
INT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2. Remove screw (A).
3. Release pawls using a suitable tool (A) and remove rear power
window switch finisher (1).
: Pawl
4. Disconnect harness connector from rear power window switch finisher.
5. Release pawls using a suitable tool (A) and remove rear door
inside handle finisher (1).
: Pawl
6. Release clip and remove tether from the front door panel.
7. Release clips using a suitable tool (A) and remove rear door fin-
isher (1).
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing rear door finisher, check that clips and pawls are securely placed in door panel
holes.
ALJIA1378ZZ
ALJIA1344ZZ
AWJIA1321ZZ
ALJIA1355ZZ
INT-20
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
BODY SIDE TRIM
Exploded View
INFOID:0000000011277476
FRONT PILLAR FINISHER
FRONT PILLAR FINISHER : Removal and Installation
INFOID:0000000011277477
REMOVAL
1. Partially remove front door welt (front edge).
1.
Front pillar finisher
2.
Front body side welt
3.
Center pillar upper finisher
4.
Rear body side welt
5.
Rear kicking plate
6.
Seat belt cover
7.
Center pillar lower finisher
8.
Front kicking plate
9.
Dash side finisher
Pawl
Clip
Front
AWJIA1324ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст