Nissan Rogue. Instruction — part 372
DLK-330
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR SWITCH
DOOR SWITCH
Description
INFOID:0000000011279094
Detects door open/close condition.
Component Function Check
INFOID:0000000011279095
1.
CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT.
2. Select “DOOR SW-DR”, “DOOR SW-AS”, “DOOR SW-RL”, “DOOR SW-RR”, in “Data Monitor”.
3. Check that the function operates normally according to the following conditions:
Is the inspection result normal?
YES
>> Door switch is OK.
NO
>> Refer to
DLK-330, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000011279096
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR SWITCH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect malfunctioning door switch connector.
3. Check signal between malfunctioning door switch harness connector and ground using oscilloscope.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK DOOR SWITCH CIRCUIT
1. Disconnect BCM connector.
Monitor item
Condition
Status
DOOR SW-DR
Front door LH
Open
On
Closed
Off
DOOR SW-AS
Front door RH
Open
On
Closed
Off
DOOR SW-RL
Rear door LH
Open
On
Closed
Off
DOOR SW-RR
Rear door RH
Open
On
Closed
Off
(+)
(–)
Signal
(Reference value)
Door switch
Connector
Terminal
Front LH
B71
3
Ground
7.0 - 8.0 V
Front RH
B141
Rear LH
B70
Rear RH
B142
PKIB4960J
2015 Rogue NAM
DOOR SWITCH
DLK-331
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2. Check continuity between door switch harness connector and BCM harness connector.
3. Check continuity between door switch harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
NO
>> Repair or replace harness.
3.
CHECK DOOR SWITCH
DLK-157, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace malfunctioning door switch. Refer to
DLK-396, "Removal and Installation"
4.
CHECK INTERMITTENT INCIDENT
GI-44, "Intermittent Incident"
.
>> Inspection End.
Component Inspection
INFOID:0000000011279097
1.
CHECK DOOR SWITCH
1. Turn ignition switch OFF.
2. Disconnect door switch connector.
3. Check door switch.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace malfunctioning door switch. Refer to
DLK-396, "Removal and Installation"
Door switch
BCM
Continuity
Connector
Terminal
Connector
Terminal
Front LH
B71
3
B16
57
Yes
Front RH
B141
53
Rear LH
B70
52
Rear RH
B142
50
Door switch
Ground
Continuity
Connector
Terminal
Front LH
B71
3
No
Front RH
B141
Rear LH
B70
Rear RH
B142
Terminal
Door switch condition
Continuity
Door switch
3
Ground part of
door switch
Pressed
No
Released
Yes
2015 Rogue NAM
DLK-332
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000011279098
Transmits door lock/unlock operation to BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000011279099
1.
CHECK FUNCTION
With CONSULT
Check “CDL LOCK SW”, “CDL UNLOCK SW” in “Data Monitor”.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> Refer to
DLK-332, "DRIVER SIDE : Diagnosis Procedure"
.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000011279100
Regarding Wiring Diagram information, refer to
.
1.
CHECK POWER WINDOW SWITCH OUTPUT SIGNAL
1. Turn ignition switch ON.
2. Check voltage at the main power window and door lock/unlock switch connector when the switch is turned
to “LOCK” or “UNLOCK”.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 2.
2.
CHECK POWER WINDOW SWITCH GROUND
1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch connector.
3. Check continuity between main power window and door lock/unlock switch connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK POWER WINDOW SWITCH
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
CDL UNLOCK SW
LOCK
: OFF
UNLOCK
: ON
Connector
Main power window and door lock/unlock
switch state
Terminal
Voltage
(Approx.)
D6
Neutral
→ Unlock
15
Ground
Battery voltage
→ 0
Neutral
→ Lock
3
Main power window and door lock/unlock switch
connector
Terminal
Continuity
D6
1
Ground
Yes
2015 Rogue NAM
DOOR LOCK AND UNLOCK SWITCH
DLK-333
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Check continuity between main power window and door lock/unlock switch terminals.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace main power window and door lock/unlock switch. Refer to
.
4.
CHECK POWER WINDOW SWITCH CIRCUITS
1. Disconnect BCM connector.
2. Check continuity between BCM connector and main power window and door lock/unlock switch connec-
tor.
3. Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK INTERMITTENT INCIDENT
GI-44, "Intermittent Incident"
.
>> Inspection End.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000011279101
Transmits door lock/unlock operation to BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000011279102
1.
CHECK FUNCTION
With CONSULT
Check “CDL LOCK SW”, “CDL UNLOCK SW” in “Data Monitor”.
Main power window and door lock/unlock switch state
Terminals
Continuity
Unlock
1 - 3
Yes
Lock
1 - 15
Neutral/Unlock
1 - 15
No
Neutral/Lock
1 - 3
BCM connector
Terminal
Main power window and door lock/unlock
switch connector
Terminal
Continuity
M18
40
D6
15
Yes
10
3
BCM connector
Terminal
Continuity
M18
40
Ground
No
10
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст