Nissan Rogue. Instruction — part 824
IP-22
< REMOVAL AND INSTALLATION >
CLUSTER LID C
CLUSTER LID C
Exploded View
INFOID:0000000011280361
Removal and Installation
INFOID:0000000011280362
REMOVAL
1. Release cluster lid C (1) clips and pawls using a suitable tool.
: Metal clip
: Pawl
2. Disconnect the in-vehicle sensor hose from the cluster lid C (if equipped).
3. Disconnect the harness connectors from cluster lid C and remove.
INSTALLATION
Installation is in the reverse order of removal.
1.
Audio unit (DISPLAY AUDIO) / AV con-
trol unit (NAVIGATION WITHOUT
BOSE) (NAVIGATION WITH BOSE)
2.
A/C switch assembly (AUTOMATIC
AIR CONDITIONING) / front air control
(MANUAL AIR CONDITIONING)
3.
Cluster lid C
ALJIA1388ZZ
AWJIA1307ZZ
INSTRUMENT LOWER PANEL LH
IP-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
INSTRUMENT LOWER PANEL LH
Removal and Installation
INFOID:0000000011280363
REMOVAL
1. Release instrument side finisher (LH) (1) pawls using a suitable
tool and remove.
: Pawl
2. Remove bolts (A) and fuel filler lid/hood lock release handle (1)
from instrument lower panel LH.
3. Remove data link cover from the instrument lower panel LH.
4. Release the clip using a suitable tool and remove accessory
connector (1) from instrument lower panel LH.
: Clip
5. Release the pawls using a suitable tool and remove data link
connector (2) from instrument lower panel LH.
: Pawl
6. Release the clips and pawls using a suitable tool, disconnect the
harness connector and remove instrument lower panel LH (1).
: Pawl
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1394ZZ
AWJIA1308ZZ
ALJIA1392ZZ
ALJIA1396ZZ
IP-24
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY AND HOUSING
GLOVE BOX ASSEMBLY AND HOUSING
Removal and Installation
INFOID:0000000011280364
REMOVAL
1. Release instrument side finisher (RH) (1) pawls using a suitable
tool and remove.
: Pawl
NOTE:
LH side shown; RH similar.
2. Release the glove box damper (1) from the glove box assembly
(2) as shown.
3. Release the glove box assembly pawls as shown.
: Pawl
4. Release the pawls and remove the glove box assembly.
: Pawl
5. Remove instrument finisher E. Refer to
IP-16, "INSTRUMENT FINISHER E : Removal and Installation"
.
6. Remove audio unit (DISPLAY AUDIO). Refer to
AV-67, "Removal and Installation"
.
7. Remove AV control unit. Refer to
AV-200, "Removal and Installation"
AV-369, "Removal and Installation"
(NAVIGATION WITH BOSE).
ALJIA1394ZZ
ALJIA1406ZZ
ALJIA1407ZZ
ALJIA1405ZZ
GLOVE BOX ASSEMBLY AND HOUSING
IP-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
8. Remove front air control or A/C switch assembly. Refer to
HAC-182, "Removal and Installation"
(MANUAL
AIR CONDITIONING) or
HAC-102, "Removal and Installation"
(AUTOMATIC AIR CONDITIONING).
9. Remove the glove box housing screws (A).
10. Release the clips using a suitable tool, disconnect the harness
connector and remove glove box housing.
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1404ZZ
ALJIA1472ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст