Nissan Rogue. Instruction — part 599
DIAGNOSIS SYSTEM (IPDM E/R)
EXL-25
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HEADLAMP (HI) RH [%]
Indicates condition of headlamp high beam RH.
HEADLAMP (LO) LH [%]
Indicates condition of headlamp low beam LH.
HEADLAMP (LO) RH [%]
Indicates condition of headlamp low beam RH.
A/C RELAY STUCK [NG/OK]
Indicates condition of A/C relay.
A/C RELAY [Off/On]
Indicates condition of A/C relay.
COMP ECV STATUS [NG/OK]
Indicates condition of A/C compressor.
VEHICLE SECURITY HORN [Off/On]
Indicates condition of horn relay.
BATTERY CURRENT SENSOR [NG/OK]
Indicates condition of battery current sensor.
FRONT FOG LAMP [Off/On]
Indicates condition of front fog lamps.
COMP ECV CURRENT [A]
Indicates condition of A/C compressor current.
BATTERY VOLTAGE [V]
Indicates condition of battery voltage.
COOLING FAN DUTY [%]
Indicates condition of cooling fans.
HOOD SW (CAN) [OPEN/CLOSE]
Indicates condition of hood switch.
FRONT WIPER [STOP/LOW/HIGH]
Indicates condition of front wiper motor.
FR WIPER STOP POSITION [STOP P/ACTIVE P]
Indicates condition of front wiper motor stop.
HEADLAMP (HI) [Off/On]
Indicates condition of headlamp high beams.
HEADLAMP (LO) [Off/On]
Indicates condition of headlamp low beams.
IGNITION RELAY STATUS [Off/On]
Indicates condition of ignition relay-1.
IGN RELAY MONITOR [Off/On]
Indicates condition of ignition relay-1 feedback.
IGNITION POWER SUPPLY [Off/On]
Indicates condition of ignition relay-1.
INTERLOCK/PNP SW (CAN) [Off/On]
Indicates condition of transmission range switch P (Park) and N
(Neutral) positions.
PUSH-BUTTON IGN SW (CAN) [Off/On]
Indicates condition of push-button ignition switch.
TAIL LAMP [Off/On]
Indicates condition of tail lamps.
REVERSE SIGNAL (CAN) [Off/On]
Indicates condition of transmission range switch R (Reverse) po-
sition.
ST&ST CONT RELAY STATUS [Off/ST R On]
Indicates condition of starter cut and starter relays.
STARTER MOTOR STATUS [Off/On]
Indicates condition of starter motor.
STARTER RELAY (CAN) [LOW/HIGH]
Indicates condition of starter relay.
IPDM NOT SLEEP [NO RDY/RDY]
Indicates condition of IPDM E/R sleep status.
AFTER COOLING TIME [No request/Request]
Indicates condition of cooling fan request.
AFTER COOLING SPEED [%]
Indicates condition of cooling fans.
COOLING FAN TYPE [NISSAN/RENAULT]
Indicates cooling fan type.
COMPRESSOR REQ1 [Off/On]
Indicates condition of A/C compressor request.
VHCL SECURITY HORN REQ [Off/On]
Indicates condition of horn relay request.
DTRL REQ [Off/On]
Indicates condition of daytime running light request.
SLEEP/WAKE UP [WAKEUP/SLEEP]
Indicates condition of IPDM E/R sleep/wake.
CRANKING ENABLE-TCM [NG/OK]
Indicates condition of crank enable from TCM.
CRANKING ENABLE-ECM [NG/OK]
Indicates condition of crank enable from ECM.
CAN DIAGNOSIS [NG/OK]
Indicates condition of CAN diagnosis.
FRONT FOG LAMP REQ [Off/On]
Indicates condition of front fog lamp request.
HIGH BEAM REQ [Off/On]
Indicates condition of headlamp high beam request.
HORN CHIRP [Off/On]
Indicates condition of horn relay request.
COOLING FAN REQ [%]
Indicates condition of cooling fan request.
ENGINE STATUS [STOP/RUN/IDLING]
Indicates condition of engine status.
Monitor Item [Unit]
Description
EXL-26
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
DIAGNOSIS SYSTEM (IPDM E/R)
ACTIVE TEST
CAN DIAG SUPPORT MNTR
LAN-14, "CAN Diagnostic Support Monitor"
.
TURN SIGNAL REQ [Off/LH/RH]
Indicates condition of turn signal request.
FR WIPER REQ [RETURN/LOW/HIGH]
Indicates condition of front wiper motor request.
SHIFT POSITION [P/R/N/D/L]
Indicates condition of transmission range switch positions.
LOW BEAM REQ [Off/On]
Indicates condition of headlamp low beam request.
POSITION LIGHT REQ [Off/On]
Indicates condition of parking lamp request.
COMPRESSOR REQ2 [Off/On]
Indicates condition of A/C compressor request.
IGNITION SW [Off/On]
Indicates condition of ignition switch.
VEHICLE SPEED (METER) [mph/km/h]
Indicates vehicle speed.
BAT DISCHARGE COUNT [0-100]
Indicates condition of battery discharge.
BATTERY STATUS [NG/OK]
Indicates battery status.
Monitor Item [Unit]
Description
Test item
Description
HORN
This test is able to check horn operation [Off/On].
FRONT WIPER
This test is able to check wiper motor operation [Off/Low/High].
COMPRESSOR
This test is able to check A/C compressor operation [Off/On].
COOLING FAN (DUAL)
This test is able to check cooling fan operation [Off/LO/HI].
HEADLAMP (HI)
This test is able to check headlamp high beam operation [Off/3/5].
HEADLAMP (LO)
This test is able to check headlamp low beam operation [Off/3/5].
FRONT FOG LAMP
This test is able to check front fog lamp operation [Off/3/5].
DAYTIME RUNNING LAMP
This test is able to check daytime running lamp operation [Off/3/5].
PARKING LAMP
This test is able to check parking lamp operation [Off/3/5].
TAIL LAMP
This test is able to check tail lamp operation [Off/3/5].
BCM, IPDM E/R
EXL-27
< ECU DIAGNOSIS INFORMATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ECU DIAGNOSIS INFORMATION
BCM, IPDM E/R
List of ECU Reference
INFOID:0000000011280723
ECU
Reference
BCM (with Intelligent Key system)
BCS-46, "DTC Inspection Priority Chart"
BCM (without Intelligent Key system)
BCS-107, "DTC Inspection Priority Chart"
IPDM E/R
EXL-28
< WIRING DIAGRAM >
[HALOGEN HEADLAMP]
HEADLAMP
WIRING DIAGRAM
HEADLAMP
Wiring Diagram
INFOID:0000000011280724
AALWA1050GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст