Nissan Rogue. Instruction — part 152
SYSTEM
BRC-19
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
CONDITION FOR TURN ON THE WARNING LAMP
Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
CONDITION FOR TURN ON THE INDICATOR LAMP
VDC OFF indicator lamp
• Turns ON when VDC function and TCS function are switched to non-operational status (OFF) by VDC OFF
switch.
• Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
ABS OUT valve
Switches the fluid pressure line to increase, hold or decrease according to signals from control unit.
Return check valve
Returns the brake fluid from brake caliper to master cylinder by bypassing orifice of each valve when
brake is released.
Cut valve 1
Cut valve 2
Performs the duty control of fluid pressure increased by pump according to signals from control unit.
Pressure Sensor
Detects the brake pedal operation amount.
Component
Function
Condition (status)
ABS warning lamp
Brake warning lamp
VDC warning lamp
Ignition switch OFF.
OFF
OFF
OFF
For approx. 1 seconds after the ignition switch is turned ON
ON
ON
ON
Approx. 1 seconds after ignition switch is turned ON (when the
system is in normal operation).
OFF
OFF
OFF
After engine starts
OFF
OFF
OFF
When brake fluid is less than the specified level (brake fluid level
switch ON)
OFF
ON
OFF
When parking brake operates (parking brake switch ON)
OFF
ON
OFF
VDC function is malfunctioning
OFF
OFF
ON
TCS function is malfunctioning
OFF
OFF
ON
ABS function is malfunctioning
ON
OFF
ON
EBD function is malfunctioning
ON
ON
ON
Brake limited slip differential (BLSD) function is malfunctioning
OFF
OFF
ON
Brake assist function is malfunctioning
OFF
OFF
ON
hill start assist function is malfunctioning
OFF
OFF
ON
hill descent function is malfunctioning
ON
ON
OFF
Brake force distribution function is malfunctioning
OFF
OFF
ON
When brake booster vacuum decreases
OFF
ON
OFF
When vacuum sensor is malfunctioning
OFF
ON
OFF
VDC function is operating
OFF
OFF
Blinking
TCS function is operating
OFF
OFF
Blinking
ABS function is operating
OFF
OFF
OFF
EBD function is operating
OFF
OFF
OFF
Brake limited slip differential (BLSD) function is operating
OFF
OFF
Blinking
Brake assist function is operating
OFF
OFF
OFF
hill start assist function is operating
OFF
OFF
OFF
hill descent function is operating
OFF
OFF
OFF
Condition (status)
VDC OFF indicator lamp
Ignition switch OFF.
OFF
For approx. 1 seconds after the ignition switch is turned ON.
ON
BRC-20
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
SYSTEM
CONDITION FOR TURN ON THE INDICATOR LAMP
Hill descent indicator lamp
• Turns ON by the hill descent switch.
• Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
Fail-Safe
INFOID:0000000011280570
VDC FUNCTION, TCS FUNCTION, BRAKE LIMITED SLIP DIFFERENTIAL FUNCTION, BRAKE AS-
SIST FUNCTION, hill start assist FUNCTION, hill descent FUNCTION AND BRAKE FORCE DISTRI-
BUTION FUNCTION
VDC warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and
electric unit (control unit)]. The control is suspended for VDC function, TCS function, Brake limited slip differ-
ential (BLSD) function, Brake assist function, hill start assist function and Brake force distribution function. The
vehicle status becomes the same as models without VDC function, TCS function, Brake limited slip differential
(BLSD) function, Brake assist function, hill start assist function and Brake force distribution function. However,
ABS function and EBD function are operated normally.
ABS FUNCTION
ABS warning lamp and VDC warning lamp in combination meter turn ON when a malfunction occurs in system
[ABS actuator and electric unit (control unit)]. The control is suspended for VDC function, TCS function, ABS
function, Brake limited slip differential (BLSD) function, Brake assist function, hill start assist function and
Brake force distribution function. The vehicle status becomes the same as models without VDC function, TCS
function, ABS function, Brake limited slip differential (BLSD) function, Brake assist function, hill start assist
function and Brake force distribution function. However, EBD function is operated normally.
NOTE:
ABS self-diagnosis sound may be heard the same as in the normal condition, because self-diagnosis is per-
formed when ignition switch turns ON and when vehicle initially starts.
EBD FUNCTION
ABS warning lamp, brake warning lamp and VDC warning lamp in combination meter turn ON when a mal-
function occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC
function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function, Brake
assist function, hill start assist function and Brake force distribution function. The vehicle status becomes the
same as models without VDC function, TCS function, ABS function, EBD function, Brake limited slip differen-
tial (BLSD) function, Brake assist function, hill start assist function and Brake force distribution function.
Approx. 1 seconds after ignition switch is turned ON (when the
system is in normal operation).
OFF
When VDC OFF switch is ON (VDC function, TCS function and
Active trace control function are OFF).
ON
Condition (status)
VDC OFF indicator lamp
Condition (status)
Hill Descent indicator lamp
Ignition switch OFF.
OFF
For approx. 1 seconds after the ignition switch is turned ON.
ON
Approx. 1 seconds after ignition switch is turned ON (when the
system is in normal operation).
OFF
When hill descent switch is ON.
ON
When hill descent control switch is on, but the system is not en-
gaged.
Blinking
SYSTEM
BRC-21
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
DTC
Fail-safe condition
C1101
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• EBD function (only when both 2 rear wheels are malfunctioning)
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1102
C1103
C1104
C1105
C1106
C1107
C1108
C1109
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1111
C1113
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1115
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1120
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1121
C1122
C1123
C1124
C1125
C1126
C1127
BRC-22
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
SYSTEM
C1130
The following functions are suspended:
• VDC function
• TCS function
• Brake limited slip differential (BLSD) function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1138
C1140
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1142
The following functions are suspended:
• VDC function
• TCS function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1143
The following functions are suspended:
• VDC function
• TCS function
• Brake limited slip differential (BLSD) function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1144
C1145
The following functions are suspended:
• VDC function
• TCS function
• ABS function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
C1146
C1155
The following functions are suspended:
• VDC function
• TCS function
• Brake limited slip differential (BLSD) function
• Brake assist function
• hill start assist function
• hill descent function
• Brake force distribution function
• Active trace control function (control of chassis control module)
DTC
Fail-safe condition
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст