Nissan Rogue. Instruction — part 663
LICENSE PLATE LAMP
EXL-281
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
CAUTION:
• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REMOVAL
1. Remove license plate lamp. Refer to
EXL-280, "Removal and Installation"
.
2. Rotate license plate lamp bulb socket counterclockwise and remove.
3. Remove license plate lamp bulb from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install the bulb socket securely for watertightness.
EXL-282
< UNIT DISASSEMBLY AND ASSEMBLY >
[LED HEADLAMP]
FRONT COMBINATION LAMP
UNIT DISASSEMBLY AND ASSEMBLY
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000011280935
Disassembly and Assembly
INFOID:0000000011280936
DISASSEMBLY
1. Remove front combination lamp. Refer to
EXL-266, "Removal and Installation"
.
2. Rotate the turn signal lamp bulb socket counterclockwise and remove.
3. Remove the turn signal lamp bulb from the bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
ALLIA1614ZZ
1.
Front combination lamp
2. Turn signal lamp bulb socket
3. Turn signal lamp bulb
4.
Front combination lamp harness 5.
Front combination lamp mounting
bracket
REAR COMBINATION LAMP
EXL-283
< UNIT DISASSEMBLY AND ASSEMBLY >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Exploded View
INFOID:0000000011280937
Disassembly and Assembly
INFOID:0000000011280938
DISASSEMBLY
1. Remove rear combination lamp. Refer to
EXL-275, "Removal and Installation"
2. Rotate the stop lamp bulb socket counterclockwise and remove.
3. Remove the stop lamp bulb from the bulb socket.
4. Rotate the tail lamp bulb socket counterclockwise and remove.
5. Remove the tail lamp bulb from the bulb socket.
6. Rotate the turn signal lamp bulb socket counterclockwise and remove.
7. Remove the turn signal lamp bulb from bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
AWLIA2341ZZ
1. Rear combination lamp
2.
Turn signal lamp bulb
3. Tail lamp bulb
4. Stop lamp bulb
A. Rear combination lamp harness
EXL-284
< SERVICE DATA AND SPECIFICATIONS (SDS)
[LED HEADLAMP]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000011280939
*: Always check with the Parts Department for the latest parts info.
Item
Wattage (W)*
Front combination lamp
High beam
—
Low beam
—
Turn signal lamp
28/8
Side marker lamp
—
Daytime running lamp
—
Front fog lamp
55
Side turn signal lamp
—
Rear combination lamp
Stop lamp
21
Tail lamp
5
Turn signal lamp
21
Back-up lamp
Tail lamp
5
Back-up lamp
16
License plate lamp
5
High-mounted stop lamp
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст