Nissan Rogue. Instruction — part 335
DLK-182
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY WARNING BUZZER
YES
>> Inspection End.
NO
>> Replace Intelligent Key warning buzzer. Refer to
DLK-280, "Removal and Installation"
.
2015 Rogue NAM
INTELLIGENT KEY
DLK-183
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY
Component Function Check
INFOID:0000000011278905
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech
II User Guide for additional information.
• Check Intelligent Key relative signal strength.
• Confirm vehicle Intelligent Key antenna signal strength.
1.
CHECK FUNCTION
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “RKE OPE COUN1” in “Data Monitor”.
3. Check that the function operates normally according to the following conditions:
Is the inspection result normal?
YES
>> Intelligent Key is OK.
NO
>> Refer to
DLK-183, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000011278906
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech
II User Guide for additional information.
• Check Intelligent Key relative signal strength.
• Confirm vehicle Intelligent Key antenna signal strength.
1.
CHECK INTELLIGENT KEY BATTERY
Check by connecting a resistance (approximately 300
Ω) so that the
current value becomes about 10 mA. Refer to
.
Is the measurement value within the specification?
YES
>> Replace Intelligent Key.
NO
>> Replace Intelligent Key battery.
Monitor item
Condition
RKE OPE COUN1
Check that the numerical value is changing while operating on the Intelligent Key.
Standard
: Approx. 2.5 - 3.0V
OCC0607D
2015 Rogue NAM
DLK-184
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
METER BUZZER CIRCUIT
METER BUZZER CIRCUIT
Description
INFOID:0000000011278907
• The buzzer for the warning chime system is installed in the combination meter.
• The combination meter sounds the buzzer based on the signals transmitted from various units.
Component Function Check
INFOID:0000000011278908
1.
CHECK OPERATION OF METER BUZZER
1. Select “BUZZER” of “BCM” on CONSULT.
2. Perform “LIGHT WARN ALM” or “SEAT BELT WARN TEST” of “Active Test”.
Does meter buzzer activate?
YES
>> Inspection End.
NO
>> Refer to
DLK-184, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000011278909
1.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “METER/M&A” and check the “BUZZER” monitor value.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-84, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
BUZZER
Under the condition of buzzer input
: On
Except above
: Off
2015 Rogue NAM
KEY WARNING LAMP
DLK-185
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY WARNING LAMP
Component Function Check
INFOID:0000000011278910
1.
CHECK FUNCTION
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “INDICATOR” in “Active Test”.
3. Touch “KEY IND” or “KEY ON” to check that it works normally.
Is the inspection result normal?
YES
>> Key warning lamp is OK.
NO
>> Refer to
DLK-185, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000011278911
1.
CHECK KEY WARNING LAMP
MWI-21, "CONSULT Function (METER/M&A)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INTERMITTENT INCIDENT
GI-44, "Intermittent Incident"
.
>> Inspection End.
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст