Nissan Rogue. Instruction — part 355
DLK-262
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
HOOD LOCK
HOOD LOCK RELEASE HANDLE : Removal and Installation
INFOID:0000000011279029
REMOVAL
1. Remove fuel filler lid/hood lock release handle bolts (A).
2. Disconnect fuel filler lid release cable (2) from fuel filler lid
release handle (1).
3. Disconnect hood lock release cable (4) from hood lock release
handle (3).
4. Remove hood lock release handle.
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3422ZZ
2015 Rogue NAM
FRONT DOOR LOCK
DLK-263
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT DOOR LOCK
Exploded View
INFOID:0000000011279030
DOOR LOCK
DOOR LOCK : Removal and Installation
INFOID:0000000011279031
REMOVAL
1. Remove front door finisher. Refer to
INT-15, "Removal and Installation"
2. Remove vapor barrier.
3. Remove front door lock bolts (A).
1.
Front door lock
2.
Inside handle
3.
Door key cylinder rod (LH only)
4.
Outside handle bracket
5.
Front gasket
6.
Outside handle
7.
Outside handle escutcheon / door key
cylinder (LH only)
8.
Rear gasket
A.
Clip
AWKIA2920ZZ
ALKIA3355ZZ
2015 Rogue NAM
DLK-264
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
4. Disconnect door key cylinder rod (LH only) (1) from front door
lock (2) (LH only).
5. Disconnect door lock cables from inside handle and outside handle..
6. Disconnect the harness connector from the front door lock and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse front door lock bolts.
• Tighten bolts to specification. Refer to
• After installation, check door lock cables are properly engaged to inside handle and outside handle
bracket.
• When installing door key cylinder rod (LH only), be sure to rotate door key cylinder rod holder until a
click is felt.
• After installation, check door open/close and lock/unlock operation.
• Check door lock assembly for poor lubrication. If necessary apply a suitable multi-purpose grease.
INSIDE HANDLE
INSIDE HANDLE : Removal and Installation
INFOID:0000000011279032
REMOVAL
1. Remove front door finisher. Refer to
INT-15, "Removal and Installation"
2. Remove inside handle bolt (B).
3. Disconnect the door lock cables (A) and remove inside handle
(1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installation, check door lock cables are properly engaged to inside handle.
• After installation, check door open/close and lock/unlock operation.
OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation
INFOID:0000000011279033
REMOVAL
1. Fully close front door glass.
2. Remove front door finisher. Refer to
INT-15, "Removal and Installation"
ALKIA2487ZZ
ALKIA3392ZZ
2015 Rogue NAM
FRONT DOOR LOCK
DLK-265
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Remove front door vapor barrier (1).
NOTE:
LH side shown; RH similar.
4. Remove door side grommet (1), and remove bolt from grommet
hole (2).
5. Separate door key cylinder rod (LH only) (1) from door key cylin-
der assembly (LH only) (2).
6. While pulling (1) outside handle, remove (2) door key cylinder
assembly (LH side) or outside handle escutcheon (RH side).
ALKIA3488ZZ
JMKIA5888ZZ
ALKIA2487ZZ
ALKIA2487ZZ
JMKIA0560ZZ
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст