Nissan Rogue. Instruction — part 35
AV-132
< BASIC INSPECTION >
[NAVIGATION WITHOUT BOSE]
INSPECTION AND ADJUSTMENT
4.
OPERATION CHECK
Confirm that each function controlled by AV control unit operates normally.
>> Work End.
CONFIGURATION (AV CONTROL UNIT) : Configuration List
INFOID:0000000011276815
CAUTION:
Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.
⇔: Items which confirm vehicle specifications
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT)
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Description
INFOID:0000000011276816
Vehicle specification needs to be written with CONSULT because it is not written after replacing around view
monitor control unit.
Configuration has three functions as follows:
CAUTION:
• When replacing around view monitor control unit, you must perform “Select Saved Data List” or
"After Replace ECU" with CONSULT.
• Complete the procedure of “Select Saved Data List” or "After Replace ECU" in order.
• If you set incorrect “Select Saved Data List” or "After Replace ECU", incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• Never perform “Select Saved Data List” or "After Replace ECU" except for new around view monitor
control unit.
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Work Procedure
INFOID:0000000011276817
1.
WRITING MODE SELECTION
CONSULT
Select “Reprogramming, Configuration” of around view monitor control unit.
When writing saved data>>GO TO 2.
When writing instructionly>>GO TO 3.
2.
PERFORM “SAVED DATA LIST”
CONSULT
Automatically “Operation Log Selection” window will display if “Before Replace ECU” was performed. Select
applicable file from the “Save Data List” and press “Confirm”.
>> Work End.
MANUAL SETTING ITEM
Items
Setting value
SOUND SYSTEM
BASE
⇔ BOSE
CAMERA SYSTEM
NONE/AVM
⇔ REAR CAMERA
Function
Description
"Before Replace ECU"
• Reads the vehicle configuration of current around view monitor control unit.
• Saves the read vehicle configuration.
"After Replace ECU"
Writes the vehicle configuration with instruction selection.
"Select Saved Data List"
Writes the vehicle configuration with saved data.
AV
INSPECTION AND ADJUSTMENT
AV-133
< BASIC INSPECTION >
[NAVIGATION WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
3.
PERFORM “AFTER REPLACE ECU” OR “MANUAL CONFIGURATION”
CONSULT
1. Select “After Replace ECU” or “Instruction Configuration”.
2. Identify the correct model and configuration list. Refer to
AV-133, "CONFIGURATION (AROUND VIEW
MONITOR CONTROL UNIT) : Configuration List"
3. Confirm and/or change setting value for each item.
CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally
if the setting is not correct.
4. Select “Next”.
CAUTION:
Make sure to select “Next”, confirm each setting value and press “OK” even if the indicated con-
figuration of brand new around view monitor control unit is same as the desirable configuration. If
not, configuration which is set automatically by selecting vehicle model can not be memorized.
5. When "Completed", select "End".
>> GO TO 4.
4.
OPERATION CHECK
Confirm that each function controlled by around view monitor control unit operates normally.
>> Work End.
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Configuration List
INFOID:0000000011276818
CAUTION:
Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.
⇔: Items which confirm vehicle specifications
REGISTRATION (AV CONTROL UNIT)
REGISTRATION (AV CONTROL UNIT) : Description
INFOID:0000000011276819
AFTER REPLACEMENT
If the AV control unit is replaced with a new AV control unit, the new AV control unit must be registered using
the registration code.
CAUTION:
If the new AV control unit registration code is not registered, the “APPS” mode will not function.
REGISTRATION (AV CONTROL UNIT) : Work Procedure
INFOID:0000000011276820
1.
RECORD REGISTRATION CODE FOR REPLACEMENT AV CONTROL UNIT
1. Refer to the replacement AV control unit’s label located on the top of the AV control unit.
MANUAL SETTING ITEM
Items
Setting value
BCI FUNCTION
WITH
⇔ WITHOUT
AV-134
< BASIC INSPECTION >
[NAVIGATION WITHOUT BOSE]
INSPECTION AND ADJUSTMENT
2. Create a registration code to supply to NISSAN Owner Services by combining the last 9 digits of the NIS-
SAN PART NO. (1) and the first 7 digits of the bar code number (2).
3. Record the registration code.
>> GO TO 2.
2.
REGISTER REPLACEMENT AV CONTROL UNIT
Register the replacement AV control unit by contacting NISSAN Owner Services. Refer to TSB.
>> GO TO 3.
3.
OPERATION CHECK
Verify that the AV control unit “APPS” function operates normally.
>> Work End.
PREDICTED COURSE LINE CENTER POSITION ADJUSTMENT
ALNIA1654ZZ
AWNIA3614ZZ
AV
INSPECTION AND ADJUSTMENT
AV-135
< BASIC INSPECTION >
[NAVIGATION WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PREDICTED COURSE LINE CENTER POSITION ADJUSTMENT : Description
INFOID:0000000011276821
Adjust the center position of the predictive course line of the rear view monitor if it is shifted.
PREDICTED COURSE LINE CENTER POSITION ADJUSTMENT : Work Procedure
INFOID:0000000011276822
1.
DRIVING
Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more.
>> End.
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR)
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Description
INFOID:0000000011276823
• Calibration must be performed after removing/replacing the cameras, removing parts (e.g. front grille, door
mirror, and others) mounted on the cameras, or replacing the Around view monitor control unit.
• The use of CONSULT is required to perform calibration or writing of calibration results to the Around view
monitor control unit.
• Align the white lines on the road near the vehicle at the boundary of each camera image by this camera cal-
ibration. The white lines far from the vehicle may not be aligned at the boundary of each camera image. The
farther the line, the greater the difference is.
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure
INFOID:0000000011276824
CALIBRATION FLOWCHART
Following the flowchart shown in the figure, perform the calibration.
NOTE:
JSNIA4210GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст