Nissan Rogue. Instruction — part 1032
SB-14
< REMOVAL AND INSTALLATION >
SECOND ROW SEAT BELT
3. Remove seat belt retractor nut (A) and remove seat belt retactor
(1) from rear seatback frame (LH).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten the D-ring anchor bolt, seat belt retractor bolt, and lower anchor bolt to specification. Refer
• Make sure the D-ring anchor operates freely.
• Always perform an inspection after repair to make sure the system is functioning within specifica-
tions. Refer to
SEAT BELT BUCKLE
SEAT BELT BUCKLE : Removal and Installation
INFOID:0000000011279687
SEAT BELT BUCKLE - (LH)
Removal
1. Remove second row seat (LH). Refer to
SE-39, "Removal and Installation"
.
2. Remove seat belt buckle (LH) anchor bolt (A), then route seat
belt buckle (LH) (1) through seat cushion opening and remove.
Installation
Installation is in the reverse order of removal.
CAUTION:
• Tighten the seat belt buckle anchor bolt to specification. Refer to
• Always perform an inspection after repair to make sure the system is functioning within specifica-
tions. Refer to
SEAT BELT BUCKLE - (CENTER)
Removal
1. Remove second row seat (LH). Refer to
SE-39, "Removal and Installation"
.
ALHIA0376ZZ
ALHIA0378ZZ
SECOND ROW SEAT BELT
SB-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
2. Using a suitable tool, release clips and pawls, then remove seat
cushion outer finisher (RH).
: Clip
: Pawl
3. Remove second row seat (LH) (center) seat belt buckle anchor
bolt (A), then route seat belt buckle (center) (1) through seat
cushion opening and remove.
Installation
Installation is in the reverse order of removal.
CAUTION:
• Tighten the seat belt buckle anchor bolt to specification. Refer to
• Always perform an inspection after repair to make sure the system is functioning within specifica-
tions. Refer to
SEAT BELT BUCKLE - (RH)
Removal
1. Remove second row seat (RH). Refer to
SE-39, "Removal and Installation"
2. Using a suitable tool release clips and pawls and remove seat
cushion outer finisher (LH) (1).
: Clip
: Pawl
3. Remove seat belt buckle anchor bolt (A), then route seat belt
buckle (RH) (1) through seat cushion and remove.
ALHIA0381ZZ
ALHIA0382ZZ
ALJIA1458ZZ
ALHIA0383ZZ
SB-16
< REMOVAL AND INSTALLATION >
SECOND ROW SEAT BELT
Installation
Installation is in the reverse order of removal.
CAUTION:
• Tighten the seat belt buckle anchor bolt to specification. Refer to
• Always perform an inspection after repair to make sure the system is functioning within specifica-
tions. Refer to
THIRD ROW SEAT BELT
SB-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
THIRD ROW SEAT BELT
Exploded View
INFOID:0000000011279688
SEAT BELT RETRACTOR
SEAT BELT RETRACTOR : Removal and Installation
INFOID:0000000011279689
REMOVAL
1. Remove luggage side upper finisher. Refer to
INT-36, "LUGGAGE SIDE UPPER FINISHER : Removal
2. Pull third row seat striker release straps and raise third row seat.
1.
Seat belt retractor (RH)
2.
Seat belt D-ring bracket (RH)
3.
Seat belt hook (LH/RH)
4.
Seat belt buckle (LH/RH)
5.
Seat belt retractor (LH)
6.
Seat belt D-ring bracket (LH)
7.
Seat belt D-ring bolt cover (LH/
RH)
AWHIA0730ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст