Nissan Rogue. Instruction — part 1078
B2604 SHIFT POSITION
SEC-91
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
3. Check voltage between transmission range switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
CHECK TRANSMISSION RANGE SWITCH POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector.
3. Check continuity between transmission range switch harness connector and IPDM E/R harness connec-
tor.
Is the inspection result normal?
YES
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
NO
>> Repair or replace harness.
5.
CHECK BCM INPUT SIGNAL
1. Turn ignition switch OFF.
2. Reconnect transmission range switch connector.
3. Turn ignition switch ON.
4. Check voltage between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> GO TO 6.
6.
CHECK BCM INPUT SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect transmission range switch connector.
3. Disconnect BCM connector.
4. Check continuity between transmission range switch harness connector and BCM harness connector.
5. Check continuity between transmission range switch harness connector and ground.
Is the inspection result normal?
(+)
(–)
Voltage (V)
(Approx.)
Transmission range switch
Connector
Terminal
F78
7
Ground
Battery voltage
Transmission range switch
IPDM E/R
Continuity
Connector
Terminal
Connector
Terminal
F78
7
F35
70
Yes
(+)
(–)
Condition
Voltage (V)
(Approx.)
BCM
Connector
Terminal
M19
89
Ground
Selector lever
P or N position
Battery voltage
Other than above
0
Transmission range switch
BCM
Continuity
Connector
Terminal
Connector
Terminal
F78
10
M19
89
Yes
Transmission range switch
Ground
Continuity
Connector
Terminal
F78
10
No
2015 Rogue NAM
SEC-92
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B2604 SHIFT POSITION
YES
>> GO TO 7.
NO
>> Repair or replace harness.
7.
CHECK TRANSMISSION RANGE SWITCH
SEC-92, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Replace transmission range switch.
8.
CHECK INTERMITTENT INCIDENT
GI-44, "Intermittent Incident"
>> Inspection End.
9.
REPLACE BCM
1. Replace BCM. Refer to
BCS-75, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
>> Inspection End.
Component Inspection
INFOID:0000000011278498
1.
CHECK TRANSMISSION RANGE SWITCH
1. Turn ignition switch OFF.
2. Disconnect transmission range switch connector.
3. Check continuity between transmission range switch terminals.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace transmission range switch.
Transmission range switch
Condition
Continuity
Terminal
7
10
P or N position
Yes
Other than above
No
2015 Rogue NAM
B2608 STARTER RELAY
SEC-93
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2608 STARTER RELAY
DTC Logic
INFOID:0000000011278499
DTC DETECTION LOGIC
NOTE:
• If DTC B2608 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
• If DTC B2608 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
• If DTC B2608 is displayed with other DTC (BCM), first perform the trouble diagnosis for other DTC detected.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Press push-button ignition switch under the following conditions to start engine:
-
Selector lever: In the P position
-
Brake pedal: Depressed
2. Wait 1 second after engine started.
3. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278500
1.
CHECK DTC OF IPDM E/R
Select “Self Diagnostic Result” of “IPDM E/R” using CONSULT.
Is DTC detected?
YES
>> Perform the trouble diagnosis related to the detected DTC. Refer to
NO
>> GO TO 2.
2.
CHECK INTERMITTENT INCIDENT
GI-44, "Intermittent Incident"
.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2608
STARTER RELAY
BCM outputs starter relay OFF signal but
BCM receives starter relay ON signal from
IPDM E/R (CAN).
• Harness or connectors
(The CAN communication line is open or
shorted.)
• Harness or connectors
(Starter relay circuit is open or shorted.)
• IPDM E/R
• Starter relay
2015 Rogue NAM
SEC-94
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B260F ENGINE STATUS
B260F ENGINE STATUS
Description
INFOID:0000000011278501
BCM receives the engine status signal from ECM via CAN communication.
DTC Description
INFOID:0000000011278502
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Harness or connectors
(The CAN communication line is open or shorted.)
• ECM
FAIL-SAFE
Inhibit engine cranking
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC B260F is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or
U1010.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. U1000: Refer to
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON and wait 2 seconds or more.
2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
>> Refer to
.
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011278503
1.
CHECK DTC PRIORITY
If DTC B260F is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or
U1010.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. U1000: Refer to
NO
>> GO TO 2.
2.
INSPECTION START
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” of “BCM” using CONSULT.
3. Touch “ERASE”.
4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F. Refer to
Is DTC detected?
YES
>> GO TO 3.
NO
>> Inspection End.
DTC No.
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B260F
ENG STATE SIG LOST
(Engine state signal lost)
BCM has not yet received the engine status signal from ECM when ignition
switch is in the ON position.
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст