Nissan Rogue. Instruction — part 720
TOW TRUCK TOWING
GI-31
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
AWD MODELS
NISSAN recommends that a dolly be used as illustrated when towing AWD models.
CAUTION:
Never tow AWD models with any of the wheels on the ground as this may cause serious and expen-
sive damage to the powertrain.
Vehicle Recovery (Freeing a Stuck Vehicle)
INFOID:0000000011278267
WARNING:
• Stand clear of a stuck vehicle.
• Never spin your tires at high speed. This could cause them to explode and result in serious injury.
Parts of your vehicle could also overheat and be damaged.
CAUTION:
• Tow chains or cables must be attached only to the vehicle recovery hooks or main structural mem-
bers of the vehicle. Otherwise, the vehicle body will be damaged.
• Never use the vehicle tie downs to free a vehicle stuck in sand, snow, mud, etc. Never tow the vehi-
cle using the vehicle tie downs or recovery hooks.
• Always pull the cable straight out from the front of the vehicle. Never pull on the hook at an angle.
• Pulling devices should be routed so they never touch any part of the suspension, steering, brake or
cooling systems.
• Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or
recovery.
FRONT
Securely install the vehicle recovery hook stored with jacking tools.
NOTE:
To prevent squeaks and rattles, check that the hook is properly
secured in the stored place after use.
REAR
WARNING:
• Rear hook is not available.
CVT
JMAIA0069ZZ
ALAIA0117ZZ
GI-32
< PRECAUTION >
TOW TRUCK TOWING
To tow a vehicle equipped with an automatic transmission, an appropriate vehicle dolly MUST be placed under
the towed vehicle's drive wheels. Always follow the dolly manufacture's recommendations when using their
product.
If the vehicle is stuck in sand, snow, mud, etc., use the following procedure:
1. Turn off the Vehicle Dynamic Control System.
2. Check the area in front and behind the vehicle is clear of obstructions.
3. Turn the steering wheel right and left to clear an area around the front tires.
4. Slowly rock the vehicle forward and backward.
Shift back and forth between R (reverse) and D (drive).
Apply the accelerator as little as possible to maintain the rocking motion.
Release the accelerator pedal before shifting between R and D.
Do not spin the tires above 35 mph (55 km/h).
5. If the vehicle can not be freed after a few tries, contact a professional towing service to remove the vehi-
cle.
IDENTIFICATION INFORMATION
GI-33
< VEHICLE INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
VEHICLE INFORMATION
IDENTIFICATION INFORMATION
Model Variation
INFOID:0000000011278268
FWD Model
1: Without technology package
2: With technology package
AWD Model
1: Without technology package
2: With technology package
Prefix and Suffix Designations
Body
Engine
Grade
Transmission
Destination
US
Canada
2 Row Wagon
QR25DE
S
CVT
TDBALPZ-EUA
TDBALPZ-ENA
SV
TDBALQZ-EUA
TDBALQZ-ENA
SV Premium
TDBALTZ-EUA
—
SL
TDBALRZ-EUA
—
SL Premium
TDBALSZ-EUA
—
3 Row Wagon
S
JDBALPZ-EUA
—
SV
JDBALQZ-EUA
JDBALQZ-ENA
1
JDBALRZ-ENA
2
Body
Engine
Grade
Transmission
Destination
US
Canada
2 Row Wagon
QR25DE
S
CVT
TDBNLPZ-EUA
TDBNLPZ-ENA
SV
TDBNLQZ-EUA
TDBNLQZ-ENA
SV Premium
TDBNLTZ-EUA
—
SL
TDBNLRZ-EUA
TDBNLRZ-ENA
SL Premium
TDBNLSZ-EUA
TDBNLSZ-EUA
3 Row Wagon
S
JDBNLPZ-EUA
—
SV
JDBNLQZ-EUA
JDBNLQZ-ENA
1
JDBNLRZ-ENA
2
Position
Character
Qualifier
Definition
1
T
Body type
J: 3 Row Wagon
T: 2 Row Wagon
2
DB
Engine
DB: QR25DE
3
4
A
Axle
A: FWD
N: AWD
5
L
Drive
L: LH
6
P
Grade
P: S
Q: SV
R: SL
S: SL Premium
T: SV Premium
7
Z
Transmission
Z: CVT
GI-34
< VEHICLE INFORMATION >
IDENTIFICATION INFORMATION
Identification Number
INFOID:0000000011278269
Vehicle Identification Number Arrangement
8
T32
Model
T32: Rogue
9
10
11
E
Intake
E: EGI
12
U
Zone
U: 50-state
N: Canada
13
A
Equipment
A: Standard
14
XXXXX
Option Codes
Option Codes
15
16
17
18
Position
Character
Qualifier
Definition
1. Vehicle Identification Number (VIN)
plate
2. Vehicle identification number chas-
sis number (center of bulkhead)
3. Emission control information label
4. Air conditioner specification label
5. F.M.V.S.S./C.M.V.S.S. certification
label
6. Tire and loading information label
ALAIA0141ZZ
Position
Character
Qualifier
Definition
1
5N1
Manufacturer
5N1: USA produced Multi-purpose Vehicle
KNM: Korea produced Multi-purpose Vehicle
2
3
4
A
Engine type
A: QR25DE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст