Nissan Titan A60. Instruction — part 493
DIAGNOSIS SYSTEM (BCM)
EXL-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
INFOID:0000000006607769
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
HI BEAM SW [On/Off]
Indicates condition of combination switch.
HEAD LAMP SW 1 [On/Off]
HEAD LAMP SW 2 [On/Off]
LIGHT SW 1ST [On/Off]
AUTO LIGHT SW [On/Off]
PASSING SW [On/Off]
FR FOG SW [On/Off]
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
TURN SIGNAL R [On/Off]
Indicates condition of combination switch.
TURN SIGNAL L [On/Off]
CARGO LAMP SW [ON/OFF]
Indicates condition of cargo lamp switch.
OPTICAL SENSOR [ON/OFF]
Indicates voltage signal from optical sensor.
Test Item
Description
TAIL LAMP
This test is able to check tail lamp operation [Off/On].
HEAD LAMP
This test is able to check head lamp operation [Off/Lo/Hi].
FR FOG LAMP
This test is able to check front fog lamp operation [Off/On].
CARGO LAMP
This test is able to check cargo lamp operation [Off/On].
CORNERING LAMP
This test is able to check turn signal lamp operation [Off/LH/RH].
Support Item
Setting
Description
BATTERY SAVER SET
Off
Exterior lamp battery saver function OFF.
On*
Exterior lamp battery saver function ON.
CUSTOM A/LIGHT SETTING
MODE4
Less sensitive setting than normal setting (Turns ON later than
normal operation).
MODE3
More sensitive setting than MODE 2 (Turns ON earlier than
MODE 2).
MODE2
More sensitive setting than normal setting (Turns ON earlier
than normal operation).
MODE1*
Normal.
EXL-28
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
*: Initial setting
FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)
INFOID:0000000006607770
DATA MONITOR
ACTIVE TEST
COMB SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
INFOID:0000000006607771
DATA MONITOR
ILL DELAY SET
MODE8
180 sec
Sets delay timer function operation time
(All doors closed).
MODE7
150 sec
MODE6
120 sec
MODE5
90 sec
MODE4
60 sec
MODE3
30 sec
MODE2
OFF
MODE1*
45 sec
Support Item
Setting
Description
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
HAZARD SW [On/Off]
Indicates condition of hazard switch.
TURN SIGNAL R [On/Off]
Indicates condition of turn signal function of combination switch.
TURN SIGNAL L [On/Off]
BRAKE SW [On/Off]
Indicates condition of brake switch.
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
Monitor Item [Unit]
Description
TURN SIGNAL R [On/Off]
Indicates condition of turn signal operation of combination switch.
TURN SIGNAL L [On/Off]
HI BEAM SW [On/Off]
Indicates condition of hi beam operation of combination switch.
HEAD LAMP SW 1 [On/Off]
Indicates condition of headlamp operation of combination switch.
HEAD LAMP SW 2 [On/Off]
LIGHT SW 1ST [On/Off]
Indicates condition of lighting operation of combination switch.
PASSING SW [On/Off]
Indicates condition of passing switch operation of combination switch.
AUTO LIGHT SW [On/Off]
Indicates condition of auto light operation of combination switch.
FR FOG SW [On/Off]
Indicates condition of front fog light operation of combination switch.
FR WIPER HI [On/Off]
Indicates condition of front wiper operation of combination switch.
FR WIPER LOW [On/Off]
FR WIPER INT [On/Off]
FR WASHER SW [On/Off]
Indicates condition of front washer operation of combination switch.
INT VOLUME [1 - 7]
Indicates condition of intermittent wiper operation of combination switch.
DIAGNOSIS SYSTEM (BCM)
EXL-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BATTERY SAVER
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)
INFOID:0000000006607772
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
KEY ON SW [On/Off]
Indicates condition of key switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
KEY CYL LK SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEYLESS LOCK [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK [On/Off]
Indicates condition of unlock signal from keyfob.
Test item
Description
BATTERY SAVER
This test is able to check battery saver operation [Off/On].
Support Item
Setting
Description
ROOM LAMP TIMER SET
MODE3
10 min
Sets the interior room lamp battery saver timer operating time.
MODE2
60 min
MODE1*
15 min
EXL-30
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (IPDM E/R)
DIAGNOSIS SYSTEM (IPDM E/R)
Diagnosis Description
INFOID:0000000006607773
AUTO ACTIVE TEST
Description
In auto active test mode, the IPDM E/R sends a drive signal to the following systems to check their operation.
• Oil pressure low/coolant pressure high warning indicator
• Oil pressure gauge
• Rear window defogger
• Front wipers
• Tail, license and parking lamps
• Front fog lamps
• Headlamps (Hi, Lo)
• A/C compressor (magnetic clutch)
Operation Procedure
1. Close the hood and front door RH, and lift the wiper arms from the windshield (to prevent windshield dam-
age due to wiper operation).
NOTE:
When auto active test is performed with hood opened, sprinkle water on windshield before hand.
2. Turn ignition switch OFF.
3. Turn the ignition switch ON and, within 20 seconds, press the front door switch LH 10 times. Then turn the
ignition switch OFF.
4. Turn the ignition switch ON within 10 seconds. After that the horn sounds once and the auto active test
starts.
5. After a series of the following operations is repeated 3 times, auto active test is completed.
NOTE:
When auto active test mode has to be cancelled halfway through test, turn ignition switch OFF.
CAUTION:
• If auto active test mode cannot be actuated, check door switch system. Refer to
(King Cab) or
DLK-28, "CREW CAB : Description"
(Crew Cab).
• Do not start the engine.
Inspection in Auto Active Test Mode
When auto active test mode is actuated, the following 6 steps are repeated 3 times.
Operation
sequence
Inspection Location
Operation
1
Rear window defogger (Crew Cab only)
10 seconds
2
Front wipers
LO for 5 seconds
→ HI for 5 seconds
AWMIA1111ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст