Nissan Titan A60. Instruction — part 980
BLOWER FAN RESISTOR
VTL-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
BLOWER FAN RESISTOR
Removal and Installation
INFOID:0000000006161803
Front Blower Motor Resistor - Heater and Cooling Unit Assembly
REMOVAL
1. Remove the glove box assembly. Refer to
IP-16, "Removal and Installation"
2. Disconnect the front blower motor resistor electrical connector.
3. Remove the two screws and remove the front blower motor resistor.
INSTALLATION
Installation is in the reverse order of removal.
LJIA0139E
1.
Heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (driver)
4.
Variable blower control or front blower
motor resistor if equipped
5.
Air mix door motor (passenger)
6.
Mode door motor
7.
Defroster door motor
VTL-24
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
DUCTS AND GRILLES
Component
INFOID:0000000006161804
Ducts - Heater and Cooling Unit Assembly
LJIA0141E
1.
Defroster nozzle
2.
LH side demister duct
3.
LH ventilator duct
4.
RH side demister duct
5.
RH ventilator duct
6.
Center ventilator duct
7.
Heater and cooling unit assembly
8.
Floor duct
9.
Clips
DUCTS AND GRILLES
VTL-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Grilles
Removal and Installation
INFOID:0000000006161805
DEFROSTER NOZZLE
Removal
1. Remove the instrument panel. Refer to
IP-12, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the defroster nozzle.
Installation
Installation is in the reverse order of removal.
RH AND LH SIDE DEMISTER DUCT
Removal
1. Remove the instrument panel. Refer to
IP-12, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the RH or LH side demister duct.
AWIIA0237ZZ
1.
Defroster grille
2.
Instrument panel
3.
Storage tray bottom cover (LH)
4.
Side ventilator assembly LH
5.
Cluster lid C ventilator LH
6.
Cluster lid C
7.
Cluster lid C ventilator RH
8.
Side ventilator assembly RH
9.
Storage tray bottom cover (RH)
VTL-26
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
4. Remove the RH or LH ventilator duct.
5. Remove the defroster nozzle.
Installation
Installation is in the reverse order of removal.
RH AND LH VENTILATOR DUCT
Removal
1. Remove the instrument panel. Refer to
IP-12, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the RH or LH ventilator duct.
Installation
Installation is in the reverse order of removal.
CENTER VENTILATOR DUCT
Removal
1. Remove the instrument panel. Refer to
IP-12, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the defroster nozzle.
4. Remove the RH and LH side demister ducts.
5. Remove the RH and LH ventilator ducts.
6. Remove the center ventilator duct.
Installation
Installation is in the reverse order of removal.
FLOOR DUCT
Removal
1. Remove the floor carpet. Refer to
INT-19, "Removal and Installation"
.
2. Remove the two clips and remove the floor duct.
Installation
Installation is in the reverse order of removal.
GRILLES
Removal
1. Remove the interior trim panels as necessary. Refer to
IP-12, "Removal and Installation"
2. Remove the grille from the interior trim panel.
Installation
Installation is in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст