Nissan Titan A60. Instruction — part 716
MA-44
< PERIODIC MAINTENANCE >
CHASSIS AND BODY MAINTENANCE
Check the caliper for leaks, repair as necessary.
PAD
Check the pads for wear or damage. Refer to
(front disc pad) ,
BR-7, "BRAKE PAD : Inspection"
disc pad) .
STEERING GEAR AND LINKAGE
STEERING GEAR AND LINKAGE : Checking Steering Gear and Linkage
INFOID:0000000006158446
STEERING GEAR
• Check the steering gear housing for looseness, damage, and oil
leakage as shown.
• Check the steering column connections for looseness.
STEERING LINKAGE
• Check the ball joint, dust cover and other component parts for looseness, wear, damage, and grease leak-
age.
POWER STEERING FLUID AND LINES
POWER STEERING FLUID AND LINES : Checking Power Steering Fluid and Line
INFOID:0000000006158447
CHECKING FLUID LEVEL
SMA922A
LMA051
SGIA0506E
CHASSIS AND BODY MAINTENANCE
MA-45
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
• Check the power steering fluid level with the engine off.
• Check fluid level on reservoir. Use “HOT” range at fluid tempera-
tures of 50
° to 80°C (122° to 176°F). Use “COLD” range at fluid
temperatures of 0
° to 30°C (32° to 86°F).
CAUTION:
• Do not overfill.
• Recommended fluid is Genuine NISSAN PSF or equivalent.
Refer to
MA-21, "FOR NORTH AMERICA : Fluids and Lubri-
(United States and Canada),
(Mexico).
CHECKING LINES
• Check lines for improper attachment, leaks, cracks, damage, loose
connections, chafing, and deterioration.
AXLE AND SUSPENSION PARTS
AXLE AND SUSPENSION PARTS : Checking Axle and Suspension Parts
INFOID:0000000006158448
FRONT AND REAR AXLE AND SUSPENSION PARTS
Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage.
• Shake each wheel to check for excessive play.
• Rotate each wheel to check for abnormal noise.
• Check the axle and suspension nuts and bolts for looseness.
• Check the strut and shock absorber for oil leakage or other damage.
• Check the suspension ball joints for grease leakage and ball joint dust cover for cracks or other damage.
PROPELLER SHAFT
Inspect the propeller shaft tube for dents or cracks. If damaged, replace the propeller shaft assembly.
LOCKS AND HINGES
LGIA0021E
SGIA0506E
SMA525A
MA-46
< PERIODIC MAINTENANCE >
CHASSIS AND BODY MAINTENANCE
LOCKS AND HINGES : Lubricating Locks, Hinges and Hood Latches
INFOID:0000000006158449
NOTE:
Lubricate the locations shown with a suitable multi-purpose grease.
Refer to
MA-21, "FOR NORTH AMERICA : Fluids and Lubricants"
(United States and Canada),
MEXICO : Fluids and Lubricants"
(Mexico).
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS : Checking
Seat Belts, Buckles, Retractors, Anchors and Adjusters
INFOID:0000000006158450
Check the seat belt buckles, webbing, retractors, anchors and adjusters. Replace any seat belt assembly as
necessary. Refer to
• Check the seat belt anchors for loose mounting bolts, damage, or excessive wear.
WLIA0019E
CHASSIS AND BODY MAINTENANCE
MA-47
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
• Check the seat belt webbing for any damage, cuts, fraying, or excessive wear.
• Check the retractor for smooth operation.
• Check the function of the buckles by inserting the seat belt tongue and checking for proper engagement of
the buckle and press the button on the buckle to check for proper release of the seat belt tongue.
WARNING:
• After any collision, inspect all seat belt assemblies, including retractors and other attached compo-
nents, such as the guide rail set. NISSAN recommends replacing all seat belt assemblies in use dur-
ing a collision, unless they are not damaged and are inspected to confirm they are operating
properly after a minor collision.
Also inspect all seat belt assemblies that are not in use during a collision, and replace any compo-
nents if damaged or not operating properly. The seat belt pre-tensioner should be replaced even if
the seat belts are not in use during a frontal collision where the driver and passenger air bags have
been deployed.
• If any component of the seat belt assembly is suspected of being damaged or not operating prop-
erly, do not repair the component. Replace the components as an assembly.
• If the seat belt webbing is cut, frayed, or damaged then replace the seat belt assembly.
• Never lubricate the seat belt buckle or tongue.
• When replacing any seat belt assembly always use a Genuine NISSAN seat belt assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст