Nissan Titan A60. Instruction — part 776
PWC-8
< SYSTEM DESCRIPTION >
POWER WINDOW SYSTEM
Hold the door key cylinder to the LOCK or UNLOCK direction for more than 1 second to OPEN or CLOSE front
power windows when ignition switch is OFF. In addition, it stops when key position is moved to NEUTRAL
when operating.
OPERATION CONDITION
• Ignition switch OFF.
• Hold door key cylinder to LOCK position for more than 1 second to perform CLOSE operation of the door
glass.
• Hold door key cylinder to UNLOCK position for more than 1 second to perform OPEN operation of the door
glass.
KEYLESS POWER WINDOW DOWN OPERATION (FRONT LH & RH)
Front power windows open when the unlock button on keyfob is activated and kept pressed for more than
3
(NOTE)
seconds with the ignition switch OFF. The windows keep opening if the unlock button is continuously
pressed.
The power window opening stops when the following operations are performed:
• When the unlock button is kept pressed more than 15 seconds.
• When the ignition switch is turned ON while the power window opening is operated.
• When the unlock button is released.
While retained power operation activate, keyless power window down function cannot be operated.
NOTE:
Keyless power window down operation mode can be changed by “PW DOWN SET” mode in “WORK SUP-
PORT”. Refer to
BCS-18, "MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTI REMOTE ENT)"
NOTE:
Use CONSULT-III to change settings.
MODE1 (3sec)/MODE2 (OFF)/MODE3 (5sec)
Component Parts Location
INFOID:0000000006161026
AWKIA1326ZZ
POWER WINDOW SYSTEM
PWC-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Component Description
INFOID:0000000006161027
POWER WINDOW SYSTEM
1.
A. Main power window and door
lock/unlock switch D7, D8 (Crew
Cab), D15 (King Cab)
Power window and door lock/unlock
switch RH D105
B. Front door switch LH B8, RH B108
C. Front power window motor LH D9,
RH D104
D. Front door lock assembly LH (key
cylinder switch) D14
2.
A. Rear power window switch LH
D203, RH D303 (Crew Cab)
B. Rear power window motor LH
D204, RH D304 (Crew Cab)
3.
A. Steering column (view with instru-
ment panel removed)
B. BCM M18, M19, M20
4.
Rear power drop glass switch R103
(Crew Cab)
5.
Rear power drop glass up relay
M154 (Crew Cab)
Rear power drop glass down relay
M155 (Crew Cab)
6.
Rear power drop glass motor B80
(view with rear finisher removed)
(Crew Cab)
Component
Function
BCM
• Supplies power supply to power window switch.
• Controls retained power.
Main power window and door lock/unlock
switch
• Directly controls all power window motor of all doors.
• Controls anti-pinch operation of front power window LH.
Power window and door lock/unlock
switch RH
• Controls front power window motor RH.
• Controls anti-pinch operation of front power window RH.
Rear power window switch (Crew Cab)
• Controls rear power window motors LH and RH.
Rear power drop glass switch (Crew Cab) • Controls rear power drop glass motor.
Front power window motor LH
• Integrates the ENCODER POWER and WINDOW MOTOR.
• Starts operating with signals from main power window and door lock/unlock switch.
• Transmits power window motor rotation as a pulse signal to main power window and
door lock/unlock switch.
Front power window motor RH
Starts operating with signals from main power window and door lock/unlock switch &
power window and door lock/unlock switch RH.
Rear power window motor (Crew Cab)
Starts operating with signals from main power window and door lock/unlock switch &
rear power window switch.
Rear power drop glass motor (Crew Cab)
Starts operating with signal from rear power drop glass switch.
Front door lock assembly LH (key cylinder
switch)
Transmits operation condition of key cylinder switch to power window main switch.
Front door switch LH or RH
Detects door open/close condition and transmits to BCM.
PWC-10
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
INFOID:0000000006628740
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
RETAINED PWR
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
×
Exterior lamp
HEADLAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Air conditioner
AIR CONDITIONER
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
×
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
Panic alarm system
PANIC ALARM
×
DIAGNOSIS SYSTEM (BCM)
PWC-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
RETAINED PWR : CONSULT-III Function (BCM - RETAINED PWR)
INFOID:0000000006628741
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
Test Item
Description
RETAINED PWR
This test is able to check retained power operation [Off/On].
Support Item
Setting
Description
RETAINED PWR SET
MODE3
2 min
Sets the retained accessory power operating time.
MODE2
OFF
MODE1*
45 sec
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст