Nissan Titan A60. Instruction — part 91
AV
TEL ANTENNA
AV-189
< REMOVAL AND INSTALLATION >
[PREMIUM WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TEL ANTENNA
Removal and Installation
INFOID:0000000006166550
REMOVAL
1. Disconnect the battery negative terminal.
2. Slide the front passenger seat fully forward.
3. Remove the Bluetooth control unit kick shield screws and remove the Bluetooth control unit kick shield.
4. Remove the Bluetooth antenna screws (A), disconnect the Blue-
tooth antenna connector (B) and remove the Bluetooth antenna
(1).
• Bluetooth control unit screws (C)
• Bluetooth control unit (2)
•
:Front of vehicle
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0281ZZ
AV-190
< REMOVAL AND INSTALLATION >
[PREMIUM WITHOUT NAVIGATION]
BLUETOOTH CONTROL UNIT
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000006166551
REMOVAL
1. Disconnect the negative battery terminal.
2. Slide the front passenger seat fully forward.
3. Remove the Bluetooth control unit kick shield screws and remove the Bluetooth control unit kick shield.
4. Remove the Bluetooth control unit screws (C), disconnect the
Bluetooth control unit connectors and remove the Bluetooth con-
trol unit (2).
• Bluetooth antenna (1)
• Bluetooth antenna screws (A)
• Bluetooth antenna connector (B)
•
:Front of vehicle
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0281ZZ
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-191
< BASIC INSPECTION >
[PREMIUM WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000006166552
OVERALL SEQUENCE
DETAILED FLOW
1.
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the
incident/malfunction occurred).
>> GO TO 2.
2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition
when the symptom is detected.
>> GO TO 3.
3.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
ALNIA0182GB
AV-192
< BASIC INSPECTION >
[PREMIUM WITH NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
Is malfunctioning part detected?
YES
>> GO TO 4.
NO
>> GO TO 2.
4.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnostic Procedure.
>> GO TO 5.
5.
FINAL CHECK
Refer to confirmed symptom in step 2, and make sure that the symptom is not detected.
Was the repair confirmed?
YES
>> Inspection End.
NO
>> GO TO 2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст