Nissan Titan A60. Instruction — part 224
DOOR MIRROR DEFOGGER LH
DEF-17
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
8.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
GI-39, "Intermittent Incident"
.
Is the inspection result normal?
YES
>> Check the following.
• Battery power supply circuit
• IPDM E/R
NO
>> Repair or replace the malfunctioning parts.
Component Inspection (With Automatic Drive Positioner)
INFOID:0000000006164648
1.
CHECK DOOR MIRROR DEFOGGER
Check continuity between door mirror LH terminals 10 and 11.
Is the inspection result normal?
YES
>> Check the condition of the harness and the connector.
NO
>> Replace malfunctioning door mirror LH. Refer to
.
Component Inspection (Without Automatic Drive Positioner)
INFOID:0000000006164649
1.
CHECK DOOR MIRROR DEFOGGER
Check continuity between door mirror LH terminals 4 and 6.
Is the inspection result normal?
YES
>> Check the condition of the harness and the connector.
NO
>> Replace malfunctioning door mirror LH. Refer to
.
10 - 11
: Continuity should exist.
AWLIA1209ZZ
4 - 6
: Continuity should exist.
ALLIA0889ZZ
DEF-18
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR DEFOGGER RH
DOOR MIRROR DEFOGGER RH
Description
INFOID:0000000006164650
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000006164651
1.
CHECK DOOR MIRROR DEFOGGER RH
Check that the heating wire of door mirror defogger RH is heated when turning the rear window defogger
switch ON.
Is the inspection result normal?
YES
>> Door mirror defogger RH is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000006164652
Regarding Wiring Diagram information, refer to
.
1.
CHECK POWER SUPPLY
Check if the following fuse in the IPDM E/R is blown.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
2.
CHECK DOOR MIRROR DEFOGGER POWER SUPPLY CIRCUIT
1. Turn ignition switch ON.
2. Check voltage between IPDM E/R connector and ground.
Is the inspection result normal?
YES
>> GO TO 3 (with automatic drive positioner)
YES
>> GO TO 5 (without automatic drive positioner)
NO
>> Replace IPDM E/R. Refer to
PCS-28, "Removal and Installation of IPDM E/R"
.
3.
CHECK DOOR MIRROR DEFOGGER POWER SUPPLY CIRCUIT 2
1. Turn ignition switch OFF.
2. Disconnect door mirror RH.
3. Turn ignition switch ON.
4. Check voltage between door mirror RH connector and ground.
COMPONENT PARTS
AMPERE
FUSE NO.
IPDM E/R
15A
43
Connector
Terminal
Condition
Voltage (V)
(Approx.)
(+)
(-)
E120
23
Ground
Rear window defogger
switch ON
Battery voltage
Rear window defogger
switch OFF
0
LIIA2049E
Connector
Terminal
Condition
Voltage (V)
(Approx.)
(+)
(-)
DOOR MIRROR DEFOGGER RH
DEF-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT
Check continuity between door mirror RH connector D107 terminal
11 and ground.
Is the inspection result normal?
YES
>> GO TO 7
NO
>> Repair or replace harness.
5.
CHECK DOOR MIRROR DEFOGGER POWER SUPPLY CIRCUIT 2
1. Turn ignition switch OFF.
2. Disconnect door mirror RH.
3. Turn ignition switch ON.
4. Check voltage between door mirror RH connector and ground.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> Repair or replace harness.
6.
CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT
Check continuity between door mirror RH connector D106 terminal 6
and ground.
Is the inspection result normal?
YES
>> GO TO 7
NO
>> Repair or replace harness.
7.
CHECK DOOR MIRROR DEFOGGER RH
Check door mirror defogger RH.
DEF-20, "Component Inspection (With Automatic Drive Positioner)"
.
DEF-20, "Component Inspection (Without Automatic Drive Positioner)"
Is the inspection result normal?
YES
>> GO TO 8
NO
>> Replace door mirror. Refer to
MIR-15, "Door Mirror Assembly"
.
D107
10
Ground
Rear window defogger
switch ON
Battery voltage
Rear window defogger
switch OFF
0
11 - Ground
: Continuity should exist.
LIIA1454E
Connector
Terminal
Condition
Voltage (V)
(Approx.)
(+)
(-)
D106
4
Ground
Rear window defogger
switch ON
Battery voltage
Rear window defogger
switch OFF
0
6 - Ground
: Continuity should exist.
ALLIA0888ZZ
DEF-20
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR DEFOGGER RH
8.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
GI-39, "Intermittent Incident"
Is the inspection result normal?
YES
>> Check the following.
• Battery power supply circuit
• IPDM E/R
NO
>> Repair or replace the malfunctioning parts.
Component Inspection (With Automatic Drive Positioner)
INFOID:0000000006164653
1.
CHECK DOOR MIRROR DEFOGGER
Check continuity between door mirror RH terminals 10 and 11.
Is the inspection result normal?
YES
>> Check the condition of the harness and the connector.
NO
>> Replace malfunctioning door mirror RH. Refer to
.
Component Inspection (Without Automatic Drive Positioner)
INFOID:0000000006164654
1.
CHECK DOOR MIRROR DEFOGGER
Check continuity between door mirror RH terminals 4 and 6.
Is the inspection result normal?
YES
>> Check the condition of the harness and the connector.
NO
>> Replace malfunctioning door mirror RH. Refer to
.
10 - 11
: Continuity should exist.
AWLIA1209ZZ
4 - 6
: Continuity should exist.
ALLIA0889ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст