Nissan Titan A60. Instruction — part 4
ADP-6
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
>> GO TO 11
11.
FINAL CHECK
Perform the DTC confirmation procedure (if DTC is detected) or component function check (if no DTC is
detected) again, and then check that the malfunction can be repaired securely.
Are all malfunctions corrected?
YES
>> Inspection End.
Symptom is detected.>> GO TO 4
DTC is detected.>> GO TO 7
INSPECTION AND ADJUSTMENT
ADP-7
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INSPECTION AND ADJUSTMENT
Preliminary Check
INFOID:0000000006163433
1.
FOREIGN OBJECTS
Check the following:
• objects on or behind the seats that could cause binding
• objects under the seats that may be interfering with the seat’s moving parts
• objects under pedals that may interfere with movement
Are there any foreign objects that could be causing interference?
YES
>> Remove objects.
NO
>> GO TO 2
2.
WIRING CONNECTIONS
1. Disconnect harness connectors.
2. Check terminals for damage or loose connections.
3. Reconnect harness connectors.
Are any connectors damaged or loose?
YES
>> Repair or replace damaged parts.
NO
>> GO TO 3
3.
POWER AND GROUND
Check power supply and ground circuits for control unit. Refer to
ADP-48, "DRIVER SEAT CONTROL UNIT :
Is the inspection result normal?
YES
>> Refer to
.
NO
>> Repair or replace as necessary.
Special Repair Requirement
INFOID:0000000006163434
Refer to Owner’s Instruction for Automatic Drive Positioner system operating instructions.
ADP-8
< BASIC INSPECTION >
PRE-INSPECTION FOR DIAGNOSTIC
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
INFOID:0000000006163435
1.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and ground circuit as shown below.
• Driver seat control unit: Refer to
ADP-48, "DRIVER SEAT CONTROL UNIT : Diagnosis Procedure"
• Automatic drive positioner control unit: Refer to
ADP-49, "AUTOMATIC DRIVE POSITIONER CONTROL
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace the malfunctioning part.
2.
CHECK MANUAL FUNCTION
Check the instruction function operations by operating the relevant switches as shown below.
• Seat (slide, reclining, lifting front, lifting rear)
• Pedal assembly (forward, backward)
• Door mirror
Do all instruction functions operate normally?
YES
>> GO TO 3
NO (Seat, pedal, door mirror)>>Go to SYMPTOM 1, refer to
. And, GO TO 4 if
the result of SYMPTOM 1 is OK.
3.
CHECK MEMORY FUNCTION 1
Register the seat positions (refer to Owner’s Instruction) and check that all parts of the seat, pedals, steering
wheel and door mirrors move to their memory positions correctly.
Are the operations normal?
YES
>> Check each malfunction according to the instruction of the SYMPTOM 4, refer to
No (memory indicator operates normally)>> Go to SYMPTOM 2, refer to
.
No (memory indicator does not operate normally either)>> GO TO 5
4.
CHECK MEMORY FUNCTION 2
Register the seat positions (refer to Owner’s Instruction) and check that all parts of the seat, pedals and door mir-
rors move to their memory positions correctly.
Are the operations normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 7
5.
CHECK SEAT MEMORY SWITCH/MEMORY INDICATOR
Check the seat memory switch/memory switch indicator of the SYMPTOM 5, refer to
.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> Repair or replace the malfunctioning part.
6.
CHECK OPERATION CONDITION
Check the memory operation conditions (refer to
ADP-11, "AUTOMATIC DRIVE POSITIONER SYSTEM :
).
Are all operation conditions fulfilled?
YES
>> Go to SYMPTOM 6, refer to
NO
>> Fulfill the operation conditions. Refer to
ADP-11, "AUTOMATIC DRIVE POSITIONER SYSTEM :
.
7.
CHECK MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
PRE-INSPECTION FOR DIAGNOSTIC
ADP-9
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
• Interference with other parts because of poor installation.
Is any malfunction present in the relevant parts?
YES
>> Go to SYMPTOM 3, refer to
.
NO
>> Repair or replace the malfunctioning part.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст