Nissan Note E12. Instruction — part 527
FRONT SEAT BELT
SB-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
Before removing the D-ring anchor bolt, note the positions of washers and spacers for correct
installation.
4. Remove center pillar upper finisher. Refer to
INT-23, "CENTER PILLAR UPPER FINISHER : Removal
5. Remove seat belt height adjuster bolts and the seat belt height adjuster.
CAUTION:
Before removing the seat belt height adjuster bolts, note the positions of washers and spacers for
correct installation.
INSTALLATION
Installation is in the reverse order of removal.
• Make sure that the seat belt height adjuster is locked in the lowest position during installation.
• Make sure both the D-ring anchor and seat belt height adjuster operate freely.
• Tighten the D-ring anchor bolt and seat belt height adjuster bolts to specification. Refer to
.
• Always perform an inspection after repair to make sure the system is functioning within specifications. Refer
SB-12
< REMOVAL AND INSTALLATION >
REAR SEAT BELT
REAR SEAT BELT
Exploded View
INFOID:0000000009561092
REAR SEAT BELT BUCKLE
REAR SEAT BELT BUCKLE : Removal and Installation
INFOID:0000000009561093
REMOVAL - Seat Belt Buckle (LH)
1. Remove rear seat cushion. Refer to
SE-19, "SEAT CUSHION : Removal and Installation"
.
1.
Seat belt retractor (RH)
2.
Seat belt buckle (RH/center)
3.
Seat belt buckle (LH)
4.
Seat belt retractor (LH)
5.
Seat belt retractor (center)
6.
Seat belt guide finisher
7.
Seat belt guide
ALHIA0314ZZ
REAR SEAT BELT
SB-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
2. Release seat belt retractor (center) (1) from seat belt buckle
(LH) (2) using a suitable tool (A) as shown.
3. Remove seat belt buckle anchor bolt and seat belt buckle (LH).
CAUTION:
Before removing the seat belt buckle anchor bolt, note the positions of washers and spacers for
correct installation.
INSTALLATION
Installation is in the reverse order of removal.
• Tighten the seat belt buckle anchor bolt to specification. Refer to
• Always perform an inspection after repair to make sure the system is functioning within specifications. Refer
REMOVAL - Seat Belt Buckle (RH)
1. Remove rear seat cushion. Refer to
SE-19, "SEAT CUSHION : Removal and Installation"
.
2. Remove seat belt buckle anchor bolt and seat belt buckle (RH).
CAUTION:
Before removing the seat belt buckle anchor bolt, note the positions of washers and spacers for
correct installation.
INSTALLATION
Installation is in the reverse order of removal.
• Tighten the seat belt buckle anchor bolt to specification. Refer to
• Always perform an inspection after repair to make sure the system is functioning within specifications. Refer
SEAT BELT RETRACTOR
SEAT BELT RETRACTOR : Removal and Installation
INFOID:0000000009561095
REMOVAL - Seat Belt Retractor (LH/RH)
1. Remove luggage side upper finisher (LH/RH). Refer to
INT-33, "LUGGAGE SIDE UPPER FINISHER :
.
ALHIA0315ZZ
SB-14
< REMOVAL AND INSTALLATION >
REAR SEAT BELT
2. For seat belt retractor (LH) (1).
a. Remove D-ring anchor bolt (A).
: Front
CAUTION:
Before removing the D-ring anchor bolt, note the positions
of washers and spacers for correct installation.
b. Remove bolts (B) and the seat belt retractor (LH) (1).
(2): Seat belt retractor (center)
3. For seat belt retractor (RH) (3).
: Front
a. Remove D-ring anchor bolt (C).
CAUTION:
Before removing the D-ring anchor bolt, note the positions
of washers and spacers for correct installation.
b. Remove bolts (D) and seat belt retractor (RH) (3).
INSTALLATION
Installation is in the reverse order of removal.
• Install the seat belt retractor upper bolt first.
• Tighten the D-ring anchor bolt and the seat belt retractor bolts to specification. Refer to
.
• Make sure the D-ring anchor operates freely.
• Always perform an inspection after repair to make sure the system is functioning within specifications. Refer
REMOVAL - Seat Belt Retractor (center)
1. Remove luggage side upper finisher (LH). Refer to
INT-33, "LUGGAGE SIDE UPPER FINISHER :
.
2. Remove D-ring anchor bolt (A).
: Front
CAUTION:
Before removing the D-ring anchor bolt, note the positions
of washers and spacers for correct installation.
3. Remove bolts (B) and seat belt retractor (center) (1).
(2): Seat belt retractor (LH)
INSTALLATION
Installation is in the reverse order of removal.
• Install the center seat belt retractor upper bolt first.
• Tighten the D-ring anchor bolt and the seat belt retractor bolts to specification. Refer to
.
• Make sure the D-ring anchor operates freely.
• Always perform an inspection after repair to make sure the system is functioning within specifications. Refer
ALHIA0318ZZ
ALHIA0313ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст