Nissan Note E12. Instruction — part 313
EXL-120
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT COMBINATION LAMP
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
DISASSEMBLY
1. Remove front combination lamp. Refer to
EXL-108, "Removal and Installation"
.
2. Rotate lock ring counterclockwise and remove.
3. Remove headlamp bulb.
4. Rotate side marker bulb socket counterclockwise and remove.
5. Remove the side marker lamp bulb from the side marker bulb socket.
6. Rotate turn signal/parking lamp bulb socket counterclockwise and remove.
7. Remove turn signal/parking lamp bulb from turn signal/parking lamp bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
• After installing the headlamp bulb, be sure to install lock ring securely to ensure watertightness.
• After installing, be sure to install the bulb sockets securely to ensure watertightness.
![](/vehicle/qul/vyo/kuns/ugrt.png)
REAR COMBINATION LAMP
EXL-121
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Exploded View - Non LED
INFOID:0000000009670499
REAR COMBINATION LAMP - NON LED
Disassembly and Assembly - Non LED
INFOID:0000000009670500
REAR COMBINATION LAMP
WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Disassembly
1. Remove rear combination lamp. Refer to
EXL-115, "Removal and Installation"
2. Rotate rear turn signal lamp bulb socket counterclockwise to remove from rear combination lamp.
3. Remove the rear turn signal lamp bulb from bulb socket.
4. Rotate back-up lamp bulb socket counterclockwise to remove from rear combination lamp.
5. Remove the back-up lamp bulb from bulb socket.
6. Rotate stop/tail lamp bulb socket counterclockwise to remove from rear combination lamp.
7. Remove the stop/tail lamp bulb from bulb socket.
Assembly
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
AWLIA2166ZZ
1.
Rear combination lamp
2.
Rear tail lamp bulb
3.
Rear back-up lamp bulb
4.
Rear turn signal lamp bulb
5.
Rear combination lamp har-
ness connector
![](/vehicle/qul/vyo/kuns/jag.png)
EXL-122
< UNIT DISASSEMBLY AND ASSEMBLY >
REAR COMBINATION LAMP
Exploded View - LED
INFOID:0000000009670501
REAR COMBINATION LAMP - LED
Disassembly and Assembly - LED
INFOID:0000000009670502
REAR COMBINATION LAMP
WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Disassembly
1. Remove rear combination lamp. Refer to
EXL-115, "Removal and Installation"
2. Rotate rear turn signal lamp bulb socket counterclockwise to remove from rear combination lamp.
3. Remove the rear turn signal lamp bulb from bulb socket.
4. Rotate back-up lamp bulb socket counterclockwise to remove from rear combination lamp.
5. Remove the back-up lamp bulb from bulb socket.
6. Disconnect the harness connector from the LED lamp.
7. Rotate side marker lamp bulb socket counterclockwise to remove from rear combination lamp.
8. Remove the side marker lamp bulb from bulb socket.
Assembly
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
JMLIA3231ZZ
1.
Rear combination lamp
2. Rear tail lamp bulb
3. Rear LED lamp harness con-
nector
4.
Rear back-up lamp bulb
5. Rear turn signal lamp bulb
![](/vehicle/qul/vyo/kuns/lbpp.png)
SERVICE DATA AND SPECIFICATIONS (SDS)
EXL-123
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb specification
INFOID:0000000009015753
ARGENTINA MODELS ONLY
*: Always check with the Parts Department for the latest parts info.
NON ARGENTINA MODELS
*: Always check with the Parts Department for the latest parts info.
Item
Wattage (W)*
Front combination
Headlamp (HI/LO)
60/55
Front turn signal lamp
21
Side marker lamp
5
Fog lamp (if equipped)
55
Daytime running lamp built-in fog lamp
19
Rear combination
Stop lamp
LED
Tail lamp
5
Rear turn signal lamp
21
Back-up lamp
21
License plate lamp
5
High-mounted stop lamp
Normal glass
LED
Privacy glass
LED
Item
Wattage (W)*
Front combination
Headlamp (HI/LO)
65/55
Front turn signal/Parking lamp
27/8
Side marker lamp
5
Fog lamp (if equipped)
55
Rear combination
Stop/Tail lamp
21/5
Rear turn signal lamp
21
Back-up lamp
21
License plate lamp
5
High-mounted stop lamp
Normal glass
LED
Privacy glass
LED
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст