Nissan Note E12. Instruction — part 515
REAR RH SIDE POWER WINDOW DOES NOT OPERATE
PWC-41
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
WHEN POWER WINDOW MAIN SWITCH IS OPERATED : Diagnosis Procedure
INFOID:0000000009578862
1.
CHECK REAR POWER WINDOW SWITCH RH
Check rear power window switch RH.
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE POWER WINDOW MAIN SWITCH
• Replace power window main switch.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
PWC-42
< SYMPTOM DIAGNOSIS >
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE
PROPERLY
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY
Diagnosis Procedure
INFOID:0000000009578863
1.
CHECK FRONT DOOR SWITCH
Check front door switch.
PWC-25, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
• Replace BCM. Refer to
BCS-67, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
PWC-43
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000009578864
1.
REPLACE POWER WINDOW MAIN SWITCH
• Replace power window main switch.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
PWC-44
< REMOVAL AND INSTALLATION >
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
REMOVAL AND INSTALLATION
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Removal and Installation
INFOID:0000000009567637
REMOVAL
1. Remove main power window and door lock/unlock switch finisher door handle pull escutcheon.
2. Remove screw (A) from main power window and door lock/
unlock switch finisher.
3. Remove main power window and door lock/unlock switch fin-
isher (1) using a suitable tool (B).
: Pawl
4. Disconnect the harness connectors from the main power window and door lock/unlock switch.
5. Release pawls and remove main power window and door lock/
unlock switch (1) from main power window and door lock/unlock
switch finisher assembly (2) using a suitable tool.
: Pawl
CAUTION:
Do not bend back the pawls on the switch finisher too far or
damage may occur.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
When the main power window and door lock/unlock switch is removed or replaced, it is necessary to perform
the initialization procedure. Refer to
AWKIA2536ZZ
AWKIA2506ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст