Nissan Note E12. Instruction — part 156
DLK-128
< REMOVAL AND INSTALLATION >
FRONT DOOR
Installation is in the reverse order of removal.
CAUTION:
• After installation, perform the front door adjustment procedure. Refer to
• Apply anticorrosive agent to the door hinge mating surface.
• Check door hinge rotating point for poor lubrication. If neces-
sary, apply a suitable multi-purpose grease.
DOOR ASSEMBLY : Adjustment
INFOID:0000000009567341
JMKIA8072ZZ
1.
Front fender
2.
Front door
3.
Rear door
4.
Body side outer
5.
Door striker
6.
Striker bolt
7.
Front door hinge
8.
Rear door upper hinge
9.
Rear door lower hinge
AWKIA2493ZZ
FRONT DOOR
DLK-129
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Check the clearance and surface height between front door and each part by visual inspection and tactile feel.
If the clearance and the surface height are out of specification, adjust them according to the adjustment proce-
dure.
Unit: mm (in)
1. Remove front fender. Refer to
DLK-125, "Removal and Installation"
.
2. Loosen front door hinge nuts (door side).
3. Adjust the surface height of front door according to the specifications provided.
4. Temporarily tighten front door hinge nuts (door side).
5. Loosen front door hinge bolts (body side).
6. Raise or lower the front door at rear end to adjust clearance of the front door according to the specifica-
tions provided.
7. After adjustment tighten bolts and nuts to the specified torque.
CAUTION:
Check door hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose
grease.
8. Install front fender. Refer to refer to
DLK-125, "Removal and Installation"
.
DOOR STRIKER
DOOR STRIKER : Removal and Installation
INFOID:0000000009567342
REMOVAL
Remove bolts and door striker.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse door striker bolts.
• Tighten bolts to specification. Refer to
• After installation, check front door open/close operation. If necessary, perform the door striker
adjustment procedure. Refer to
DLK-129, "DOOR STRIKER : Adjustment"
.
DOOR STRIKER : Adjustment
INFOID:0000000009567343
DOOR STRIKER ADJUSTMENT
1. Loosen door striker bolts
2. Adjust door striker so that it becomes parallel with front door lock
insertion direction.
Section
Measurement
Standard
A – A
Clearance
4.6
± 1.0 (0.18 ± 0.04)
Surface height
0.0
± 1.0 (0.0 ± 0.04)
B – B
Clearance
4.6
± 2.0 (0.18 ± 0.08)
Surface height
0.0
± 1.5 (0.0 ± 0.06)
C – C
Clearance
4.6
± 1.0 (0.18 ± 0.04)
Surface height
0.0
± 1.0 (0.0 ± 0.04)
PIIB2804J
DLK-130
< REMOVAL AND INSTALLATION >
FRONT DOOR
3. Tighten door striker bolts to specification. Refer to
DOOR HINGE
DOOR HINGE : Removal and Installation
INFOID:0000000009567344
REMOVAL
1. Remove front fender. Refer to
DLK-125, "Removal and Installation"
2. Remove front door assembly. Refer to
DLK-127, "DOOR ASSEMBLY : Removal and Installation"
.
3. Remove front door hinge bolts (body side) and front door hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent to the hinge mating surface.
• After installation, perform the front door adjustment procedure. Refer to
• Check door hinge rotating point for poor lubrication. If neces-
sary, apply a suitable multi-purpose grease.
DOOR CHECK LINK
DOOR CHECK LINK : Removal and Installation
INFOID:0000000009567345
REMOVAL
1. Remove front door speaker. Refer to
AV-34, "Removal and Installation"
(BASE AUDIO),
(DISPLAY AUDIO) or
AV-179, "Removal and Installation"
(NAVIGATION).
2. Remove door check link bolt (body side).
3. Remove door check link bolts (door side) and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installation, check rear door open/close, lock/unlock operation.
• Check door check link rotating point for poor lubrication. If
necessary, apply a multi-purpose grease.
JMKIA8072ZZ
JMKIA8074ZZ
REAR DOOR
DLK-131
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR DOOR
Exploded View
INFOID:0000000009567346
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000009567347
CAUTION:
• Use two people when removing or installing rear door due to its heavy weight.
• When removing and installing rear door assembly, support door using a suitable tool.
REMOVAL
1. Remove rear door harness grommet (1) from body side outer
(2), then pull out rear door harness.
1.
Door sash rear tape
2.
Inside seal
3.
Door sash front tape
4.
Door upper hinge
5.
Door lower hinge
6.
Door check link
7.
Rear door panel
8.
Door striker
9.
Grommet
10. Body panel plug
AWKIA2570ZZ
JMKIA8083ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст