Nissan Note E12. Instruction — part 4
AV-8
< SYSTEM DESCRIPTION >
[BASE AUDIO]
COMPONENT PARTS
• Sound signals are input from the audio unit to output high, mid and
low range sounds.
REAR DOOR SPEAKER
• 16.5 cm (6.5 in) speakers are installed in the bottom of the rear doors.
• Sound signals are input from the audio unit to output high, mid and
low range sounds.
Rod Antenna, Antenna Amp. and Antenna Feeder
INFOID:0000000009509280
RADIO ANTENNA
AM/FM radio rod antenna and antenna base is located on the rear of the roof. The antenna amp. is built into
the antenna base.
ANTENNA FEEDER LAYOUT
JPNIA1454ZZ
JPNIA1454ZZ
AWNIA3059GB
AV
COMPONENT PARTS
AV-9
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1.
Antenna base (antenna amp.)
2.
Rod Antenna
3.
M351
4.
M67, M350
5.
M106
AWNIA3114ZZ
AV-10
< SYSTEM DESCRIPTION >
[BASE AUDIO]
SYSTEM
SYSTEM
System Description
INFOID:0000000009460105
SYSTEM DIAGRAM
AUDIO SYSTEM
The audio system consists of the following components
• Audio unit
• Front door speakers
• Rear door speakers
• Antenna amp.
• Rod antenna
When the audio system is on, AM/FM signals received by the rod antenna are amplified by the antenna amp.
and sent to the audio unit. The audio unit then sends audio signals to the front door speakers and rear door
speakers.
Refer to Owner's Instruction for audio system operating instructions.
SPEED SENSITIVE VOLUME SYSTEM
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Instruction for operating instructions.
ALNIA1522GB
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-11
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (AUDIO UNIT)
Diagnosis Description
INFOID:0000000009460106
The audio unit on board diagnosis performs the functions listed in the table below:
On Board Diagnosis Function
INFOID:0000000009460107
METHOD OF STARTING
Hardware/Software Versions and Speaker Channel Check
1. Turn the ignition ON.
2. Turn the audio system OFF.
3. While pressing the preset 1 button, turn the volume control dial
clockwise or counterclockwise 30 clicks or more.
4. Initially, all display segments will be illuminated.
5. To exit hardware/software versions and speaker channel check, turn the ignition OFF.
Communication Diagnosis
1. Turn the ignition ON.
2. Turn the audio system OFF.
Mode
Description
Hardware/Software Versions
The following information is available for the audio unit:
• hardware version.
• software version.
• EQ pin info.
Speaker Channel Check
The connection of the speakers to the audio unit can be confirmed.
Communication Diagnosis
The AV communication (M-CAN) message history can be monitored.
AWNIA3042ZZ
ALNIA1382GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст