Nissan Note E12. Instruction — part 467
PARKING BRAKE SYSTEM
PB-5
< PERIODIC MAINTENANCE >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
To prevent damage to parts, do not bend the parking brake cables.
a. Adjust the parking brake lever stroke by turning the adjusting nut using suitable tool.
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
b. Operate the parking brake lever with a force of 196 N (20.0 kg-f, 44.1lb-f). Check that the lever stroke is
within the specified number of notches. (Check by listening and counting the number of the ratchet clicks.)
Number of notches
: Refer to
PB-6
< REMOVAL AND INSTALLATION >
PARKING BRAKE CONTROL
REMOVAL AND INSTALLATION
PARKING BRAKE CONTROL
Exploded View
INFOID:0000000009365039
Removal and Installation
INFOID:0000000009365040
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation"
2. Remove the adjusting nut.
CAUTION:
Do not reuse the adjusting nut.
3. Separate the parking brake front cable from the parking brake rear cables (RH/LH).
4. Disconnect the harness connector from the parking brake switch.
5. Remove the screw and remove the parking brake switch.
6. Remove the nuts and remove the parking brake control.
INSTALLATION
Installation is in the reverse order of the removal.
CAUTION:
• Replace the parking brake control if it has been dropped or sustained an impact.
• Replace the parking brake switch if it has been dropped or sustained an impact.
• Do not reuse the adjusting nut.
Inspect and adjust the parking brake. Refer to
PB-4, "Inspection and Adjustment"
1.
Parking brake control
2.
Adjusting nut
3.
Parking brake switch
4.
Parking brake front cable
5.
Parking brake rear cable (LH)
6.
Parking brake rear cable (RH)
JPFIB0133GB
PARKING BRAKE CABLE
PB-7
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PARKING BRAKE CABLE
Removal and Installation
INFOID:0000000009619499
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation"
2. Remove the adjusting nut. Refer to
.
3. Separate the parking brake front cable from parking brake rear cables (RH/LH). Refer to
.
CAUTION:
To prevent damage to the parts, do not bend the parking brake cables.
4. Remove the parking brake front cable.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse the adjusting nut.
• Inspect and adjust the parking brake. Refer to
PB-8
< REMOVAL AND INSTALLATION >
PARKING BRAKE REAR CABLE
PARKING BRAKE REAR CABLE
Removal and Installation
INFOID:0000000009619500
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation"
2. Loosen the adjusting nut. Refer to
.
NOTE:
It is not necessary to remove the parking brake front cable.
3. Separate the parking brake rear cables (RH/LH) from the parking brake front cable. Refer to
4. Remove the rear wheels and tires using power tool. Refer to
.
5. Remove rear wheel sensors. Refer to
BRC-70, "REAR WHEEL SENSOR : Removal and Installation"
.
6. Remove the rear drum brake components. Refer to
BR-40, "Removal and Installation"
.
CAUTION:
Do not separate the brake tube from the wheel cylinders.
7. Remove the center muffler. Refer to
.
8. Remove nuts (A) and remove center floor insulators.
9. Remove the bolts and remove the parking brake rear brake cables (RH/LH).
CAUTION:
Do not excessively bend the parking brake cables.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
• Inspect and adjust the rear brakes. Refer to
BR-42, "Inspection and Adjustment"
• Inspect and adjust the parking brake. Refer to
PB-4, "Inspection and Adjustment"
ALBIA1147ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст