Nissan Note E12. Instruction — part 66
BCS-68
< REMOVAL AND INSTALLATION >
COMBINATION SWITCH
COMBINATION SWITCH
Removal and Installation
INFOID:0000000009447322
CAUTION:
• Before servicing, turn the ignition switch OFF, disconnect both battery terminals and wait at least
three minutes.
• Do not use air or electric tools when removing or installing the combination switch.
REMOVAL
1. Disconnect the negative and positive battery terminals, then wait at least three minutes. Refer to
"Removal and Installation (Battery)"
.
2. Remove the steering column covers. Refer to
IP-17, "Removal and Installation"
.
3. Rotate steering wheel clockwise to access first combination
switch screw (A) and remove.
4. Rotate steering wheel counter-clockwise to access second com-
bination switch screw (A) and remove.
5. Disconnect the harness connector (B) from the combination
switch (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
• In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis function
and delete the memory with CONSULT.
• If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunc-
tions. Refer to
BCS-54, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Work
.
ALMIA0648ZZ
ALMIA0649ZZ
BR-1
BRAKES
C
D
E
G
H
I
J
K
L
M
SECTION
BR
A
B
BR
N
O
P
CONTENTS
BRAKE SYSTEM
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Procedure without Cowl Top Cover . ..
Precaution for Brake System . . . . . . . . ....
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
Commercial Service Tool . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . ...
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . . .
NVH Troubleshooting Chart . . . . . . . . . ..
PERIODIC MAINTENANCE . . . . . . ..
BRAKE PEDAL . . . . . . . . . . . . ...
Inspection and Adjustment . . . . . . . . . ....
BRAKE FLUID . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . .
Draining . . . . . . . . . . . . . . . . ...
Refilling . . . . . . . . . . . . . . . . ...
Bleeding Brake System . . . . . . . . . . ...
BRAKE MASTER CYLINDER . . . . . . .
Inspection . . . . . . . . . . . . . . . .
BRAKE BOOSTER . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . .
FRONT DISC BRAKE . . . . . . . . . .
BRAKE PAD . . . . . . . . . . . . . . . ..
BRAKE PAD : Inspection . . . . . . . . . .
BRAKE PAD : Brake Burnishing . . . . . . . .
DISC ROTOR . . . . . . . . . . . . . . . .
DISC ROTOR : Inspection . . . . . . . . . ...
REAR DRUM BRAKE . . . . . . . . . ...
BRAKE LINING . . . . . . . . . . . . . . ..
BRAKE LINING : Inspection . . . . . . . . .
BRAKE LINING : Brake Burnishing . . . . . . .
BRAKE DRUM . . . . . . . . . . . . . . ...
BRAKE DRUM : Inspection . . . . . . . . . .
REMOVAL AND INSTALLATION . . . ...
BRAKE PEDAL . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
Inspection and Adjustment . . . . . . . . . ..
BRAKE PIPING . . . . . . . . . . . . .
FRONT . . . . . . . . . . . . . . . . . ...
FRONT : Exploded View . . . . . . . . . . .
FRONT : Hydraulic Piping . . . . . . . . . ...
FRONT : Removal and Installation . . . . . . ..
FRONT : Inspection . . . . . . . . . . . . .
REAR . . . . . . . . . . . . . . . . . . .
REAR : Exploded View . . . . . . . . . . .
REAR : Hydraulic Piping . . . . . . . . . . ..
REAR : Removal and Installation . . . . . . .
REAR : Inspection . . . . . . . . . . . . ...
BRAKE MASTER CYLINDER . . . . . . ..
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
Disassembly and Assembly . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . .
BRAKE BOOSTER AND CHECK VALVE . .
Exploded View . . . . . . . . . . . . . . .
Removal and installation . . . . . . . . . . .
BR-2
VACUUM LINES . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ....
Removal and Installation . . . . . . . . . ....
Inspection . . . . . . . . . . . . . . . ...
FRONT DISC BRAKE . . . . . . . . . .
BRAKE PAD . . . . . . . . . . . . . . . .
BRAKE PAD : Exploded View . . . . . . . ....
BRAKE PAD : Removal and Installation . . . . .
BRAKE PAD : Inspection . . . . . . . . . ....
BRAKE CALIPER ASSEMBLY . . . . . . . ....
BRAKE CALIPER ASSEMBLY : Exploded View ....
BRAKE CALIPER ASSEMBLY : Removal and In-
stallation . . . . . . . . . . . . . . . . .
BRAKE CALIPER ASSEMBLY : Disassembly and
Assembly . . . . . . . . . . . . . . . ....
REAR DRUM BRAKE . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
Disassembly and Assembly . . . . . . . . .
Inspection and Adjustment . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
General Specifications . . . . . . . . . . .
Brake Pedal . . . . . . . . . . . . . . .
Check Valve . . . . . . . . . . . . . . .
Brake Booster . . . . . . . . . . . . . . .
Front Disc Brake . . . . . . . . . . . . . .
PRECAUTIONS
BR-3
< PRECAUTION >
C
D
E
G
H
I
J
K
L
M
A
B
BR
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009578746
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Instruction.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least three minutes before performing any service.
Precaution for Procedure without Cowl Top Cover
INFOID:0000000009364984
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc. to prevent damage to
windshield.
Precaution for Brake System
INFOID:0000000009364985
WARNING:
Clean any dust from the front brake and rear brake with a vacuum dust collector. Do not blow with
compressed air.
• Brake fluid use refer to
MA-12, "Fluids and Lubricants"
.
• Do not reuse drained brake fluid.
• Do not spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off
immediately and wash with water if it gets on a painted surface.
• Always confirm the specified tightening torque when installing the brake pipes.
• After pressing the brake pedal more deeply or harder than normal driving, such as air bleeding, inspect the
brake pedal height and play. Adjust brake pedal if it is outside the standard value.
• Always clean with new brake fluid when cleaning the brake caliper and other components.
• Do not use mineral oils such as gasoline or light oil to clean. They may damage rubber parts and cause
improper operation.
PIIB3706J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст