Nissan Xterra. Instruction — part 16
AV-56
< REMOVAL AND INSTALLATION >
[BASE AUDIO]
AUDIO ANTENNA
AUDIO ANTENNA
Location of Antenna
INFOID:0000000010247140
Removal and Installation
INFOID:0000000010247141
REMOVAL
1. Remove instrument lower panel RH and glove box. Refer to
XX-XX, "*****"
.
2. Disconnect audio antenna cable from antenna feeder.
3. Remove antenna rod.
4. Remove rubber seal.
5. Remove cowl top. Refer to
XX-XX, "*****"
.
6. Remove fender protector. Refer to
XX-XX, "*****"
.
7. Remove antenna base bolts.
8. Remove antenna base and cable.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Always properly tighten the antenna rod during installation or the antenna rod may bend or break dur-
ing vehicle operation.
1.
Audio antenna
2.
Antenna feeder
3.
Audio unit
AEL610C
AV
COMPONENT PARTS
AV-57
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009485173
Component Description
INFOID:0000000009485174
AWNIA3323ZZ
1.
Front tweeter LH M109
2.
Steering wheel audio control switches 3.
Audio unit M33, M41, M44, M45, M64
4.
Front tweeter RH M111
5.
Microphone R8
6.
Front door speaker LH D12
Front door speaker RH D112
7.
Rear door speaker LH D207
Rear door speaker RH D307
8.
Bluetooth
®
control unit B141, B142,
B143 (Underneath passenger seat)
9.
Bluetooth
®
antenna
10. USB interface M214
11. Satellite antenna
12. Rod antenna
Part name
Description
Audio unit
• Controls audio, USB connection, AUX IN connection and satellite radio.
• Display unit is built in to audio unit.
Front door speakers
Outputs high, mid and low range audio signals from audio unit.
Rear door speakers
Front tweeters
Steering wheel audio control switches
• Operations for audio, hands-free phone and voice recognition are possible.
• Steering switch signal is output to Bluetooth
®
control unit.
• Bluetooth
®
control unit outputs steering switch signal to audio unit.
AV-58
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
COMPONENT PARTS
Microphone
• Used for hands-free phone operations.
• Microphone signal is transmitted to Bluetooth
®
control unit.
• Power is supplied from Bluetooth
®
control unit.
Bluetooth
®
control unit
• Inputs TEL voice signal from Bluetooth
®
antenna and outputs it to audio unit.
• Controlled via AV communication by audio unit.
Bluetooth
®
antenna
Receives TEL voice signal and outputs it to Bluetooth
®
control unit.
USB interface
USB sound and data input signals are transmitted to audio unit.
Satellite antenna
Satellite radio signal is received and transmitted to audio unit.
Rod antenna
AM/FM signal is received and transmitted to the audio unit.
Part name
Description
AV
SYSTEM
AV-59
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM
System Diagram
INFOID:0000000009485175
System Description
INFOID:0000000009485176
AUDIO SYSTEM
The audio system consists of the following components
• Audio unit
• Front door speakers
• Front tweeters
• Rear door speakers
• Steering wheel audio control switches
• USB interface
• Rod antenna
When the audio system is on, AM/FM signals received by the rod antenna are sent to the audio unit. The
audio unit then sends audio signals to the front door speakers, front tweeters and rear door speakers.
Refer to Owner's Instruction for audio system operating instructions.
SATELLITE RADIO SYSTEM
The satellite radio system consists of the following components
• Satellite antenna
• Satellite radio tuner integral to the audio unit
When the satellite radio system is on, satellite radio signals are supplied to the audio unit from the satellite
antenna. The audio unit then sends audio signals to the speakers.
Refer to Owner's Instruction for satellite radio system operating instructions.
HANDS-FREE PHONE SYSTEM
System Operation
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth
®
telephone
system.
The Bluetooth
®
telephone system allows users who have a Bluetooth
®
cellular telephone to make a wireless
connection between their cellular telephone and the Bluetooth
®
control unit. Hands-free cellular telephone
calls can be sent and received. Some Bluetooth
®
cellular telephones may not be recognized by the Bluetooth
®
control unit. When a cellular telephone or the Bluetooth
®
control unit is replaced, the telephone must be paired
with the Bluetooth
®
control unit. Different cellular telephones may have different pairing procedures, refer to
the cellular telephone operating instruction.
Refer to the Owner's Instruction for Bluetooth
®
telephone system operating instructions.
AWNIA2936GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст