Nissan Xterra. Instruction — part 694
FRONT SUN GEAR, 3RD ONE-WAY CLUTCH
TM-289
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Front Sun Gear Snap Ring
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
Front Sun Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front sun gear.
ASSEMBLY
1. Install 3rd one-way clutch in front sun gear.
CAUTION:
Apply ATF to 3rd one-way clutch.
2. Install snap ring in front sun gear using suitable tool.
3. Check operation of 3rd one-way clutch.
a. Hold oil pump assembly and turn front sun gear.
b. Check 3rd one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown, check installation direction of 3rd one-way
clutch.
SCIA3111E
SCIA3110E
SCIA3131E
TM-290
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
Exploded View
INFOID:0000000009485622
Disassembly and Assembly
INFOID:0000000009485623
DISASSEMBLY
1.
Seal ring
2.
O-ring
3.
Needle bearing
4.
Bearing race
5.
Front carrier assembly
6.
Needle bearing
7.
Snap ring
8.
Snap ring
9.
Retaining plate
10. Driven plate
11. Input clutch drum
12. Drive plate
13. Rear internal gear
Refer to
for symbols in the figure.
SCIA6734E
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
TM-291
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
1. Compress snap ring using 2 flat-bladed screwdrivers.
2. Remove front carrier assembly and input clutch assembly from
rear internal gear.
3. Remove front carrier assembly from input clutch assembly.
a. Remove bearing race from front carrier assembly.
b. Remove needle bearing from front carrier assembly.
c. Remove snap ring from front carrier assembly.
CAUTION:
Do not excessively expand snap ring.
4. Disassemble input clutch assembly.
a. Remove O-ring and seal rings from input clutch assembly.
SCIA5339E
SCIA2847E
SCIA5233E
SCIA5476E
SCIA5235E
TM-292
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
b. Remove needle bearing from input clutch assembly.
c.
Remove snap ring from input clutch drum using suitable tool.
d. Remove drive plates, driven plates and retaining plate from input
clutch drum.
INSPECTION
Front Carrier Snap Ring
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
Input Clutch Snap Ring
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Drum
• Check for deformation, fatigue or damage or burns.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Drive Plates
• Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Front Carrier
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front carrier assembly.
Rear Internal Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear internal gear assembly.
ASSEMBLY
1. Install input clutch.
SCIA2853E
SCIA2864E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст