Nissan Xterra. Instruction — part 148
BRM-12
< REMOVAL AND INSTALLATION >
BODY COMPONENT PARTS
6. Front shock absorber mounting bracket (RH/LH)
7. Bound bumper bracket (RH/LH)
8. Front brake hose bracket (RH/LH)
9. Panhard rod bracket reinforcement
10. 4th crossmember gusset (RH/LH)
11. 2nd cab mounting bracket (RH/LH)
12. 4th crossmember gusset (RH/LH)
13. 3rd cab mounting bracket (RH/LH)
14. Rear suspension mounting bracket (RH/LH)
15. 4th cab mounting bracket (RH/LH)
16. Rear bound bumper bracket (RH/LH)
17. Rear suspension rear mounting bracket (RH/LH)
18. Cab mounting bracket assembly (RH/LH)
19. 9th crossmember assembly
20. Rear torsion crossmember
21. Rear brake hose bracket
22. Rear shock pin (RH/LH)
23. 6th crossmember assembly
24. 5th crossmember assembly
25. 4th crossmember assembly
26. Crossmember support (RH/LH)
27. Front differential mounting bracket (RH/LH)
28. Engine mount (RH/LH)
29. Rear torsion crossmember collar (RH/LH)
CORROSION PROTECTION
BRM-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
CORROSION PROTECTION
Corrosion Protection
INFOID:0000000009484350
DESCRIPTION
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in
NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-cor-
rosive measures.
ANTI-CORROSIVE PRECOATED STEEL (GALVANNEALED STEEL)
To improve repairability and corrosion resistance, a new type of anti-
corrosive precoated steel sheet has been adopted replacing conven-
tional zinc-coated steel sheet.
Galvannealed steel is electroplated and heated to form Zinc-iron
alloy, which provides excellent and long term corrosion resistance
with cationic electrode position primer.
NISSAN Genuine Service Parts are fabricated from galvannealed steel. Therefore, it is recommended that
GENUINE NISSAN PARTS or equivalent be used for panel replacement to maintain the anti-corrosive perfor-
mance built into the vehicle at the factory.
PHOSPHATE COATING TREATMENT AND CATIONIC ELECTRODEPOSITION PRIMER
A phosphate coating treatment and a cationic electrode position primer, which provide excellent corrosion pro-
tection, are employed on all body components.
CAUTION:
Confine paint removal during welding operations to an absolute
minimum.
NISSAN Genuine Service Parts are also treated in the same manner. Therefore, it is recommended that GEN-
UINE NISSAN PARTS or equivalent be used for panel replacement to maintain anti-corrosive performance
built into the vehicle at the factory.
ANTI-CORROSIVE WAX
To improve corrosion resistance, anti-corrosive wax is applied inside the body sill and inside other closed sec-
tions. Accordingly, when replacing these parts, be sure to apply anti-corrosive wax to the appropriate areas of
PIIA0093E
PIIA0095E
BRM-14
< REMOVAL AND INSTALLATION >
CORROSION PROTECTION
the new parts. Select an excellent anti-corrosive wax which will penetrate after application and has a long shelf
life.
UNDERCOATING
The underside of the floor and wheelhouse are undercoated to prevent rust, vibration, noise and stone chip-
ping. Therefore, when such a panel is replaced or repaired, apply undercoating to that part. Use an undercoat-
ing which is rust preventive, soundproof, vibration-proof, shock-resistant, adhesive, and durable.
Precautions in undercoating
1. Do not apply undercoating to any place unless specified (such as the areas above the muffler and three
way catalyst which are subjected to heat).
2. Do not undercoat the exhaust pipe or other parts which become hot.
3. Do not undercoat rotating parts.
LIIA2062E
CORROSION PROTECTION
BRM-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
4. Apply bitumen wax after applying undercoating.
Body Sealing
INFOID:0000000009484351
DESCRIPTION
LIIA0129E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст