Nissan Xterra. Instruction — part 564
PREPARATION
PWC-59
< PREPARATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009483685
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
PWC-60
< REMOVAL AND INSTALLATION >
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
REMOVAL AND INSTALLATION
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Removal and Installation
INFOID:0000000009483686
REMOVAL
1. Using a suitable tool, release the metal clip and pawls, then lift
the main power window and door lock/unlock switch (1) from the
front door finisher (LH).
: Metal clip
: Pawl
2. Disconnect the harness connectors, then remove the assembly
from the door finisher.
3. Remove the three screws (A) from the main power window and
door lock/unlock switch (1), then separate it from the finisher (2).
INSTALLATION
Installation is in the reverse order of removal.
AWKIA1541ZZ
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
PWC-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Removal and Installation
INFOID:0000000009483687
REMOVAL
1. Using a suitable tool, release the metal clip and pawls, then lift
the front power window and door lock/unlock switch (1) from the
front door finisher (RH).
: Metal clip
: Pawl
2. Disconnect the harness connectors, then remove the assembly
from the door finisher.
3. Release the four tabs (A), two on each side, then separate the
front power window and door lock/unlock switch (1) from the fin-
isher (2).
INSTALLATION
Installation is in the reverse order of removal.
AWKIA1542ZZ
PWC-62
< REMOVAL AND INSTALLATION >
REAR POWER WINDOW SWITCH
REAR POWER WINDOW SWITCH
Removal and Installation - Rear Door Switch
INFOID:0000000009483688
REMOVAL
1. Using a suitable tool, release the metal clip and pawls, then lift
the rear power window switch and finisher (2) upward as an
assembly from the rear door finisher.
: Pawl
: Metal clip
2. Disconnect the harness connectors, then remove the assembly
from the door finisher.
3. Release the two tabs (A), one on either side, then separate the
rear power window switch (1) from the switch finisher (2).
INSTALLATION
Installation is in the reverse order of removal.
AWKIA1543ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст