Nissan Xterra. Instruction — part 740
FRONT WASHER TUBE
WW-69
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER TUBE
Washer Tube Layout
INFOID:0000000009484730
WKIA4964E
1.
Washer tank
2.
Front washer hose
3.
Washer nozzles
4.
Rear washer hose
WW-70
< REMOVAL AND INSTALLATION >
FRONT WASHER NOZZLE
FRONT WASHER NOZZLE
Removal and Installation
INFOID:0000000009484731
REMOVAL
1. Remove cowl top cover. Refer to
EXT-20, "Removal and Installation"
.
2. Remove washer nozzles.
INSTALLATION
Installation is in the reverse order of removal.
Washer Nozzle Adjustment
INFOID:0000000009484732
Adjust spray pattern to hit the aiming target zone as shown.
CAUTION:
Do not insert anything into the spray nozzle to adjust.
Move the spray nozzle (A) up/down to adjust spray pattern using
suitable tool.
A.
Aiming target zone
B.
615 mm (24.21 in)
C.
223 mm (8.78 in)
D.
432 mm (17.01 in)
E.
456 mm (17.95 in)
F.
232 mm (9.13 in)
G.
620 mm (24.41 in)
H.
662 mm (26.06 in)
J.
644 mm (25.35 in)
AWLIA1867ZZ
ALLIA1024ZZ
REAR WIPER ARM
WW-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
REAR WIPER ARM
Removal and Installation
INFOID:0000000009484733
REAR WIPER ARM
Removal
1. Remove rear wiper arm cover and the rear wiper arm nut.
2. Remove rear wiper arm.
3. Remove wiper blade from the wiper arm (if necessary).
Installation
1. Operate rear wiper motor one full cycle then turn “OFF” (AUTO STOP).
2. Clean up the pivot area as shown.
NOTE:
This will reduce the possibility of wiper arm looseness
3. Install rear wiper blade on the wiper arm.
4. Install rear wiper arm so that it is parallel to the back glass edge.
5. Install wiper arm nut and cover.
1.
Rear wiper arm and blade
2.
Rear wiper motor pivot seal
3.
Rear wiper arm cover
A.
Wiper arm parallel to back glass edge B.
Rear wiper arm nut
WKIA4965E
SEL024J
WW-72
< REMOVAL AND INSTALLATION >
REAR WIPER ARM
REAR WIPER ARM ADJUSTMENT
1. Operate rear wiper motor one full cycle, then turn “OFF” (Auto Stop).
2. Adjust rear wiper arm so that wiper arm and blade is parallel with lower edge of back glass.
3. Install rear wiper arm nut and rear wiper arm cover.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст