Nissan Xterra. Instruction — part 706
BLOWER MOTOR
VTL-9
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
BLOWER MOTOR
Component
INFOID:0000000009484331
Blower Motor
Removal and Installation
INFOID:0000000009484332
FRONT BLOWER MOTOR
Removal
1. Remove the instrument lower panel RH and lower glove box assembly. Refer to
.
2. Disconnect the harness connector from the blower motor.
3. Remove the three blower motor screws and the front blower motor.
Installation
Installation is in the reverse order of removal.
AWIIA1540ZZ
1.
Heater and cooling unit assembly
2. Blower motor
3.
Variable blower control/Blower motor resistor
Front
VTL-10
< REMOVAL AND INSTALLATION >
VARIABLE BLOWER CONTROL
VARIABLE BLOWER CONTROL
Removal and Installation
INFOID:0000000009484333
Variable Blower Control
REMOVAL
1. Disconnect the harness connector from the variable blower control.
2. Remove the two variable blower control screws and the variable blower control.
INSTALLATION
Installation is in the reverse order of removal.
WJIA1480E
1.
Heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor
4.
Variable blower control
5.
Mode door motor
FRONT BLOWER MOTOR RESISTOR
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
FRONT BLOWER MOTOR RESISTOR
Removal and Installation
INFOID:0000000009484334
Blower Motor Resistor
REMOVAL
1. Disconnect the harness connector from the blower motor resistor.
2. Remove the two blower motor resistor screws and the blower motor resistor.
INSTALLATION
Installation is in the reverse order of removal.
WJIA1480E
1.
Heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor
4.
Blower motor resistor
5.
Mode door motor
VTL-12
< REMOVAL AND INSTALLATION >
HEATER & COOLING UNIT ASSEMBLY
HEATER & COOLING UNIT ASSEMBLY
Component
INFOID:0000000009484335
Heater and Cooling Unit Assembly
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
Removal and Installation
INFOID:0000000009484336
HEATER AND COOLING UNIT ASSEMBLY
Removal
WJIA1621E
1.
High-pressure A/C pipe
2.
Low-pressure A/C pipe
3.
Expansion valve
4.
Heater core and evaporator pipes
grommet
5.
A/C drain hose grommet
6.
A/C drain hose
7.
Heater core pipe mounts
8.
Heater core pipes
9.
Heater and cooling unit assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст