Nissan Xterra. Instruction — part 454
HAC-14
< SYSTEM DESCRIPTION >
[MANUAL AIR CONDITIONER]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010244858
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
AIR CONDITIONER
Direct Diagnostic Mode
Description
ECU Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
C
U Ide
nt
ifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Air conditioner
AIR CONDITIONER
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door open
TRUNK
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
×
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
Panic alarm system
PANIC ALARM
×
DIAGNOSIS SYSTEM (BCM)
HAC-15
< SYSTEM DESCRIPTION >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
AIR CONDITIONER : CONSULT Function (BCM - AIR CONDITIONER)
INFOID:0000000010244859
DATA MONITOR
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
FAN ON SIG [On/Off]
Indicates condition of fan switch.
AIR COND SW [On/Off]
Indicates condition of A/C switch.
HAC-16
< SYSTEM DESCRIPTION >
[MANUAL AIR CONDITIONER]
SELF-DIAGNOSIS FUNCTION
SELF-DIAGNOSIS FUNCTION
Front Air Control Self-Diagnosis
INFOID:0000000009482465
A/C SYSTEM SELF-DIAGNOSIS FUNCTION
The self-diagnosis function is built into the front air control to quickly locate the cause of malfunctions.
DESCRIPTION
The self-diagnostic system diagnoses sensors, CAN system, and battery voltage on front air control. Refer to
applicable sections (items) for details. Malfunctions (if any are present) will be displayed in the form of turning
ON the A/C, MAX A/C, DEF and RECIRCULATION button LED’s. Refer to
HAC-16, "Front Air Control Self-
.
SELF-DIAGNOSTIC MODE
1. Turn ignition switch ON.
2. Press the DEF/FOOT (
) and DEF (
) mode switches at the
same time and release on the front air control.
3. Press the FOOT (
) and RECIRCULATION (
) buttons
within two seconds to enter self diagnostic mode.
4. The mode (VENT, DEF/FOOT, FOOT and VENT/FOOT) LED’s
start flashing in a clockwise sequence indicating that Self test is
in progress.This takes about 17 seconds to complete.
5. All mode LED’s stay ON once self test completes.
6. Malfunctions (if any) will be displayed in the form of turning ON
the A/C, MAX A/C, DEF and RECIRCULATION button LED’s.
HAC-16, "Front Air Control Self-Diagnosis Chart"
.
7. To exit diagnostic mode, press any button on the front air control.
Front Air Control Self-Diagnosis Chart
INFOID:0000000009482466
SELF-DIAGNOSTIC CHART
AWIIA0481ZZ
Button LED
Description
A/C
Evap sensor open
MAX A/C
Evap sensor short
DEFROST
Air mix door motor circuit malfunctioning
RECIRCULATION
Mode door motor circuit malfunctioning
MODE DOOR MOTOR
HAC-17
< DTC/CIRCUIT DIAGNOSIS >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
DTC/CIRCUIT DIAGNOSIS
MODE DOOR MOTOR
System Description
INFOID:0000000009482468
SYSTEM DESCRIPTION
Component Parts
Mode door control system components are:
• Front air control
• Mode door motor
• Position Balanced Resistor (PBR) (built into mode door motor)
• Intake sensor
System Operation
The mode door position (VENT, B/L, FOOT, D/F, and DEFROST) is set by the front air control by means of the
mode door motor. When a mode door position is selected on the front air control, voltage is applied to one cir-
cuit of the mode door motor while ground is applied to the other circuit, causing the mode door motor to rotate.
The direction of rotation is determined by which circuit has voltage applied to it, and which one has ground
applied to it. The front air control monitors the mode door position by measuring the voltage signal on the PBR
circuit.
COMPONENT DESCRIPTION
Mode Door Motor
The mode door motor is attached to the heater and cooling unit
assembly. It rotates so that air is discharged from the outlet as indi-
cated by the front air control. Motor rotation is conveyed to a link
which activates the mode door.
Mode Door Motor Component Function Check
INFOID:0000000009482469
SYMPTOM:
• Air outlet does not change.
WJIA1314E
WJIA1484E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст