Nissan Xterra. Instruction — part 425
EXT-18
< REMOVAL AND INSTALLATION >
REAR BUMPER
Units: mm (in)
1.
Rear body side outer LH
2.
Rear bumper fascia
3.
Rear combination lamp
4.
Rear bumper
5.
Back door assembly
ALKIA1954ZZ
Portion
Measurement
Standard
Difference (MAX)
A-A
E
Clearance
1.0 (0.04)
± 1.0 (0.04)
F
Surface height
—
—
B–B
G
Clearance
2.0 (0.08)
± 1.5 (0.06)
H
Surface height
—
—
C-C
J
Clearance
15.0 (0.59)
± 3.0 (0.12)
K
Surface height
0.0 (0.00)
± 3.0 (0.12)
D-D
M
Clearance
12.0 (0.47)
± 5.0 (0.20)
FRONT GRILLE
EXT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Removal and Installation
INFOID:0000000009483701
REMOVAL
1. Release upper clips from the front grille.
2. Release the pawls and clips at lower edge and sides, then remove the front grille from front bumper
assembly.
3. Remove the front emblem, if necessary.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front grille
2.
Front emblem
A.
C205 clips
Metal clip
Pawl
ALKIA1729ZZ
EXT-20
< REMOVAL AND INSTALLATION >
COWL TOP
COWL TOP
Removal and Installation
INFOID:0000000009483702
REMOVAL
1. Remove the front wiper arms. Refer to
WW-67, "Removal and Installation"
.
2. Remove the cowl top seal.
3. Remove the rubber seal and audio antenna. Refer to
XX-XX, "*****"
.
4. Remove the cowl top clips and lift the cowl top, disconnect the washer tubes from the washer nozzles and
remove the cowl top.
5. Release the clips and remove the cowl top extensions (LH/RH).
INSTALLATION
Installation is in the reverse order of removal.
1.
Cowl top extension (RH)
2.
Cowl top
3.
Cowl top seal
4.
Cowl top extension (LH)
A.
Clip C205
B.
Clip C103
C.
Grommet CF110
Front
AWKIA0063ZZ
FRONT FENDER
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT FENDER
Removal and Installation
INFOID:0000000009483703
REMOVAL
1. Remove front combination lamp. Refer to
EXL-157, "Removal and Installation"
.
2. Remove mudguard (if equipped). Refer to
EXT-24, "Removal and Installation"
3. Remove front fender protector. Refer to
EXT-22, "Removal and Installation"
.
4. Remove hood prop rod and hood prop rod hold down clip.
CAUTION:
Support the hood striker with a suitable tool to prevent it from falling.
5. Remove front fender bolts from hoodledge and dash side panel.
6. Remove front fender bolts from rocker panel and radiator core support member.
7. Remove front fender.
INSTALLATION
Installation is in the reverse order of removal.
LIIA2135E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст