Nissan Frontier. Instruction — part 1285
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
TM-351
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
a. Install drive plates, driven plates and retaining plate in input clutch drum.
CAUTION:
Take care with order of plates.
• QR25DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Drive plate/Driven plate: 5/5
• VQ40DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Drive plate/Driven plate: 7/7
b. Install snap ring in input clutch drum using suitable tool.
c. Install needle bearing in input clutch assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
JSDIA2285ZZ
SCIA7133E
SCIA2864E
SCIA2853E
TM-352
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
d. Install O-ring and seal rings in input clutch assembly.
CAUTION:
• Do not reuse O-ring and seal rings.
• Apply ATF to O-ring.
• Apply petroleum jelly to seal rings.
2. Install front carrier assembly.
a. Install snap ring to front carrier assembly.
CAUTION:
Do not expand snap ring excessively.
b. Install needle bearing in front carrier assembly.
CAUTION:
• Take care with the direction of needle bearing. Refer to
TM-322, "Location of Adjusting Shims, Needle Bearings,
Thrust Washers and Snap Rings"
.
• Apply petroleum jelly to bearing race.
c.
Install bearing race in front carrier assembly.
CAUTION:
Apply petroleum jelly to bearing race.
d. Install front carrier assembly to input clutch assembly.
3. Compress snap ring using suitable tools.
4. Install front carrier assembly and input clutch assembly to rear
internal gear.
SCIA5235E
SCIA5476E
SCIA5233E
SCIA2847E
SCIA5339E
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
TM-353
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH
HUB
Mid Sun Gear, Rear Sun Gear, High and Low Reverse Clutch Hub
INFOID:0000000009480701
COMPONENTS
DISASSEMBLY
1. Remove needle bearing and bearing race from high and low
reverse clutch hub.
2. Remove snap ring from mid sun gear assembly using suitable
tool.
CAUTION:
Do not expand snap ring excessively.
1.
Needle bearing
2.
Bearing race
3.
Snap ring
4.
High and low reverse clutch hub
5.
Needle bearing
6.
Snap ring
7.
1st one-way clutch
8.
Rear sun gear
9.
Seal ring
10. Mid sun gear
SCIA2851E
SCIA2854E
SCIA2855E
TM-354
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
3. Remove high and low reverse clutch hub from mid sun gear
assembly.
a. Remove needle bearing from high and low reverse clutch hub.
4. Remove rear sun gear assembly from mid sun gear assembly.
a. Remove snap ring from rear sun gear using suitable tool.
SCIA2856E
SCIA2857E
SCIA7018E
SCIA2859E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст