Nissan Frontier. Instruction — part 94
BCS
INSPECTION AND ADJUSTMENT
BCS-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
CONFIGURATION (BCM) : Configuration List
INFOID:0000000009479177
CAUTION:
Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.
⇔: Items which confirm vehicle specifications
MANUAL SETTING ITEM
Items
Setting value
KEYLESS ENTRY
WITH
⇔ WITHOUT
AUTO LIGHT
WITH
⇔ WITHOUT
DTRL
WITH
⇔ WITHOUT
THEFT ALARM
WITH
⇔ WITHOUT
AUTO DOOR UNLOCK TIMING
A/T
⇔ M/T
BCS-6
< SYSTEM DESCRIPTION >
BODY CONTROL SYSTEM
SYSTEM DESCRIPTION
BODY CONTROL SYSTEM
System Description
INFOID:0000000009479178
OUTLINE
• BCM (Body Control Module) controls the various electrical components. It inputs the information required to
the control from CAN communication and the signal received from each switch and sensor.
• BCM has combination switch reading function for reading the operation status of combination switches (light,
turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical com-
ponents. It also has the signal transmission function as the passed point of signal and the power consump-
tion control function that reduces the power consumption with the ignition switch OFF.
• BCM is equipped with the diagnosis function that performs the diagnosis with CONSULT and various set-
tings.
BCM control function list
Component Parts Location
INFOID:0000000009479179
• BCM M18, M19, M20 (view with lower instrument panel LH
removed)
System
Refer to
Combination switch reading system
Signal buffer system
Power consumption control system
Auto light system (if equipped)
Turn signal and hazard warning lamp system
Headlamp system
Front fog lamp system (if equipped)
Daytime running light system (Canada only)
Interior room lamp control system
Interior room lamp battery saver system
Front wiper and washer system
Warning chime system
WCS-4, "WARNING CHIME SYSTEM : System Diagram"
Door lock system (if equipped)
DLK-12, "DOOR LOCK AND UNLOCK SWITCH : System Diagram"
(NATS) Nissan anti-theft system (if equipped)
Vehicle security system (if equipped)
Remote keyless entry system (if equipped)
DLK-14, "REMOTE KEYLESS ENTRY : System Diagram"
Power window system (if equipped)
RAP (retained accessory power) system
TPMS (tire pressure monitoring system)
LKIA0564E
BCS
COMBINATION SWITCH READING SYSTEM
BCS-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
COMBINATION SWITCH READING SYSTEM
System Diagram
INFOID:0000000009479180
System Description
INFOID:0000000009479181
OUTLINE
• BCM reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the
status of each switch.
• BCM has a combination of 5 output terminals (OUTPUT 1 - 5) and 5 input terminals (INPUT 1 - 5) and reads
a maximum of 20 switch states.
COMBINATION SWITCH MATRIX
Combination switch circuit
Combination switch INPUT-OUTPUT system list
AWMIA1243GB
System
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
OUTPUT 1
—
FR WASHER
FR WIPER LOW
TURN LH
TURN RH
OUTPUT 2
FR WIPER HI
—
FR WIPER INT
PASSING
HEADLAMP 1
OUTPUT 3
INT VOLUME 1
—
—
HEADLAMP 2
HI BEAM
AWMIA1244GB
BCS-8
< SYSTEM DESCRIPTION >
COMBINATION SWITCH READING SYSTEM
COMBINATION SWITCH READING FUNCTION
Description
• BCM reads the status of the combination switch at 10 ms intervals normally.
NOTE:
BCM reads the status of the combination switch at 60 ms intervals when BCM is controlled at low power
consumption control mode.
• BCM operates as follows and judges the status of the combination switch.
- It operates the transistor on OUTPUT side in the following order: OUTPUT 1
→ 2 → 3 → 4 → 5, and outputs
voltage waveform.
- The voltage waveform of OUTPUT corresponding to the formed circuit is input into the interface on INPUT
side if any (1 or more) switches are ON.
- It reads this change of the voltage as the status signal of the combination switch.
Operation Example
In the following operation example, the combination of the status signals of the combination switch is replaced
as follows: INPUT 1 - 5 to “1 - 5” and OUTPUT 1 - 5 to “A - E”.
Example 1: When a switch (TAIL LAMP) is turned ON
OUTPUT 4
—
INT VOLUME 3
AUTO LIGHT
—
TAIL LAMP
OUTPUT 5
INT VOLUME 2
—
—
FR FOG
—
System
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
JPMIA0609GB
JMMIA0326GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст