Nissan Frontier. Instruction — part 1340
FRONT WIPER DRIVE ASSEMBLY
WW-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WIPER DRIVE ASSEMBLY
Wiper Motor and Linkage
INFOID:0000000009480088
REMOVAL AND INSTALLATION
Removal
1. Remove the cowl top. Refer to
EXT-24, "Removal and Installation"
.
2. Remove wiper frame bolts, disconnect the harness connector
from the wiper motor and remove wiper frame assembly.
3. Remove wiper motor from wiper frame assembly.
Installation
CAUTION:
• Do not drop the wiper motor or cause it to contact other parts.
• Check the grease conditions of the motor arm and wiper link joint(s). Apply grease if necessary.
1. Connect wiper motor to connector. Turn the wiper switch ON to operate wiper motor, then turn the wiper
switch OFF (auto stop).
2. Disconnect the harness connector from the wiper motor.
3. Install wiper motor to wiper frame assembly, and install wiper frame assembly.
4. Connect the harness connector to the wiper motor.
5. Install cowl top. Refer to
EXT-24, "Removal and Installation"
6. Ensure that wiper blades stop within proper clearance. Refer to
.
AWLIA1817ZZ
1.
Wiper arm covers
2.
Front LH wiper arm and blade assembly
3.
Wiper frame assembly
4.
Wiper motor
5.
Front RH wiper arm and blade assembly
A.
Wiper arm nuts
B.
Wiper frame bolts
C.
Wiper motor bolts
D.
Wiper motor pivot arm bolt
LKIA0534E
WW-56
< REMOVAL AND INSTALLATION >
FRONT WASHER TUBE
FRONT WASHER TUBE
Washer Tube Layout
INFOID:0000000009480089
WKIA4886E
1. Washer
nozzles
2.
Washer
tube
FRONT WASHER NOZZLE
WW-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER NOZZLE
Removal and Installation
INFOID:0000000009480090
REMOVAL
1. Remove cowl top. Refer to
EXT-24, "Removal and Installation"
.
2. Remove washer nozzles.
INSTALLATION
Installation is in the reverse order of removal.
Washer Nozzle Adjustment
INFOID:0000000009480091
• This vehicle is equipped with non-adjustable washer nozzles.
• If not satisfied with washer fluid spray coverage, confirm that the
washer nozzle is installed correctly.
• If the washer nozzle is installed correctly, and the washer fluid
spray coverage is not satisfactory, replace washer nozzle.
PKIA2552E
WW-58
< REMOVAL AND INSTALLATION >
WASHER TANK
WASHER TANK
Washer Tank
INFOID:0000000009480092
REMOVAL AND INSTALLATION
Removal
1. Remove front fender protector (RH). Refer to
EXT-27, "Removal and Installation of Front Fender Protec-
2. Remove clip, then remove washer tank filler neck from washer
fluid reservoir.
3. Disconnect washer hose.
4. Disconnect the harness connector from the washer motor.
5. Disconnect the harness connector from the washer tank fluid
level sensor (if equipped).
6. Remove washer tank screws and the washer tank.
Installation
Installation is in the reverse order of removal.
CAUTION:
LKIA0538E
WKIA3454E
LKIA0539E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст