Nissan Frontier. Instruction — part 98
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BCM
BCM : CONSULT Function (BCM - BCM)
INFOID:0000000009479199
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
WORK SUPPORT
CONFIGURATION
BCS-4, "CONFIGURATION (BCM) : Description"
.
CAN DIAG SUPPORT MNTR
LAN-56, "CAN Diagnostic Support Monitor"
.
IMMU
IMMU : CONSULT Function (BCM - IMMU)
INFOID:0000000009479200
SELF DIAGNOSTIC RESULT
DATA MONITOR
ACTIVE TEST
BATTERY SAVER
Monitor Item [Unit]
Description
TURN SIGNAL R [On/Off]
Indicates condition of turn signal operation of combination switch.
TURN SIGNAL L [On/Off]
HI BEAM SW [On/Off]
Indicates condition of hi beam operation of combination switch.
HEAD LAMP SW 1 [On/Off]
Indicates condition of headlamp operation of combination switch.
HEAD LAMP SW 2 [On/Off]
LIGHT SW 1ST [On/Off]
Indicates condition of lighting operation of combination switch.
PASSING SW [On/Off]
Indicates condition of passing switch operation of combination switch.
AUTO LIGHT SW [On/Off]
Indicates condition of auto light operation of combination switch.
FR FOG SW [On/Off]
Indicates condition of front fog light operation of combination switch.
FR WIPER HI [On/Off]
Indicates condition of front wiper operation of combination switch.
FR WIPER LOW [On/Off]
FR WIPER INT [On/Off]
FR WASHER SW [On/Off]
Indicates condition of front washer operation of combination switch.
INT VOLUME [1 - 7]
Indicates condition of intermittent wiper operation of combination switch.
Support Item
Setting
Description
RESET SETTING VALUE
Reset
Returns BCM to initial value in factory shipment.
Cancel
Cancels the reset function.
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [Off/On].
BCS-22
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)
INFOID:0000000009479201
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT ALM)
INFOID:0000000009479202
DATA MONITOR
ACTIVE TEST
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
KEY ON SW [On/Off]
Indicates condition of key switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
KEY CYL LK SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEYLESS LOCK [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK [On/Off]
Indicates condition of unlock signal from keyfob.
Test item
Description
BATTERY SAVER
This test is able to check battery saver operation [Off/On].
Support Item
Setting
Description
ROOM LAMP TIMER SET
MODE2
60 min
Sets the interior room lamp battery saver timer operating time.
MODE1*
10 min
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
KEYLESS LOCK [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK [On/Off]
Indicates condition of unlock signal from keyfob.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WORK SUPPORT
*: Initial setting
RETAINED PWR
RETAINED PWR : CONSULT Function (BCM - RETAINED PWR)
INFOID:0000000009479203
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000009479204
DATA MONITOR
ACTIVE TEST
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation [Off/On].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEAD LAMP(HI)
This test is able to check vehicle security lamp operation [On].
Support Item
Setting
Description
SECURITY ALARM SET
Off
Security alarm OFF.
On*
Security alarm ON.
THEFT ALM TRG
Off/On
The switch which triggered vehicle security alarm is recorded [On]. This mode is able
to confirm and erase the record of vehicle security alarm. The trigger data can be
erased by touching [CLEAR].
CLEAR
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
Test Item
Description
RETAINED PWR
This test is able to check retained power operation [Off/On].
Support Item
Setting
Description
RETAINED PWR SET
MODE3
2 min
Sets the retained accessory power operating time.
MODE2
OFF
MODE1*
45 sec
Monitor Item [Unit]
Description
OIL PRESS SW [On/Off]
Indicates condition of oil pressure switch signal received from IPDM E/R on CAN communica-
tion line.
Test Item
Description
OIL PRESSURE SW
This test is able to check the oil pressure gauge operation [Off/On].
BRAKE SW
This test is able to check the brake switch operation [Off/On].
BCS-24
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONI-
TOR)
INFOID:0000000009479205
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
SELF DIAGNOSTIC RESULT
NOTE:
Before performing Self Diagnostic Result, be sure to register the ID, or else the actual malfunction may be dif-
ferent from that displayed on CONSULT.
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
PANIC ALARM
Monitor Item
Condition
Specification
VEHICLE SPEED
Drive vehicle.
Vehicle speed (km/h or mph).
AIR PRESS FL
• Drive vehicle for a few minutes.
or
• Ignition switch ON and activation tool is trans-
mitting activation signals.
Tire pressure (kPa, kg/cm
2
or psi).
AIR PRESS FR
AIR PRESS RR
AIR PRESS RL
ID REGST FL1
Ignition switch ON.
Registration ID: Green.
No registration: Red.
ID REGST FR1
ID REGST RR1
ID REGST RL1
WARNING LAMP
Ignition switch ON.
Low tire pressure warning lamp on: ON.
Low tire pressure warning lamp off: OFF.
BUZZER
Ignition switch ON.
Buzzer in combination meter on: ON.
Buzzer in combination meter off: OFF.
Test Item
Description
WARNING LAMP
This test is able to check tire pressure warning lamp operation [Off/On].
ID REGIST WARNING
This test is able to check ID regist warning chime operation [Off/On].
FLAT TIRE WARNING
This test is able to check flat tire warning chime operation [Off/On].
HORN
This test is able to check horn operation [On].
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
Support Item
Description
ID REGIST
.
ID READ
The registered ID number is displayed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст