Nissan Frontier. Instruction — part 934
INTERIOR ROOM LAMP
INL-63
< REMOVAL AND INSTALLATION >
[WITH POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
REMOVAL AND INSTALLATION
INTERIOR ROOM LAMP
Removal and Installation
INFOID:0000000009480160
FRONT ROOM/MAP LAMP ASSEMBLY
Removal
The front room/map lamp assembly is replaced as part of the roof
INT-25, "Removal and Installation"
: Front
: Metal clip
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement
1. Using a suitable tool (A), remove the front room/map lamp RH
and/or LH lenses (1) as necessary.
: Front
: Pawl
2. Release one side of the bulb (2) from the tab using a suitable
tool, then pull straight downward to remove.
3. Install the new bulb into the socket tabs.
4. Install the front room/map lamp lens(es).
VANITY LAMP
Removal
AWLIA0867ZZ
Front room/
map lamp as-
sembly bulb
: 12V - 8W
AWLIA1667ZZ
INL-64
< REMOVAL AND INSTALLATION >
[WITH POWER DOOR LOCKS]
INTERIOR ROOM LAMP
The vanity lamp is replaced as part of the sun visor assembly. Refer
to
INT-25, "Removal and Installation"
.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
The vanity mirror lamp bulb is replaced as part of the sun visor assembly. Refer to
ROOM LAMP 2ND ROW
Removal
1. Using a suitable tool (A), release the pawls and remove the
room lamp lens (1).
: Pawl
2. Remove room lamp screws (2).
3. Disconnect the harness connector from the room lamp and
remove.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement
1. Using a suitable tool, release the pawls and remove the room lamp lens.
2. Release the room lamp bulb retainers (1), then pull bulb (2)
straight out to remove.
3. Install the bulb (2) securely into the room lamp bulb retainers (1).
ALLIA0583ZZ
AWLIA1680ZZ
Room lamp bulb
: 12V - 8W
ALLIA0326ZZ
INTERIOR ROOM LAMP
INL-65
< REMOVAL AND INSTALLATION >
[WITH POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
4. Install the room lamp lens.
INL-66
< REMOVAL AND INSTALLATION >
[WITH POWER DOOR LOCKS]
ILLUMINATION
ILLUMINATION
Removal and Installation
INFOID:0000000009480161
ILLUMINATION CONTROL SWITCH
Removal
The illumination control switch is replaced as a part of the combina-
tion meter. Refer to
MWI-90, "Removal and Installation"
Installation
Installation is in the reverse order of removal.
SHIFT SELECTOR FINISHER LAMP
Removal
1. Remove shift selector finisher from center console. Refer to
IP-25, "Removal and Installation"
.
2. Rotate shift selector finisher lamp socket (2) with bulb (3) coun-
terclockwise, then pull away from finisher (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Remove shift selector finisher from center console. Refer to
IP-25, "Removal and Installation"
.
2. Remove shift selector finisher lamp socket (1), then pull bulb (2)
straight out away from socket.
3. Install the bulb (2) into the shift selector finisher socket (1).
4. Install shift selector finisher in center console. Refer to
IP-25, "Removal and Installation"
.
LKIA0579E
ALLIA0590ZZ
AT finisher lamp bulb
: 12V - 3W
ALLIA0321ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст