Nissan Frontier. Instruction — part 62
AV-240
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITH AMPLIFIER]
STEERING SWITCH
STEERING SWITCH
Removal and Installation
INFOID:0000000009482179
Removal and Installation
REMOVAL
1. Remove the driver air bag module. Refer to
SR-11, "Removal and Installation"
.
2. Remove the steering wheel audio control switch assembly screws.
3. Disconnect the harness connectors from the steering wheel audio control switches.
4. Remove the steering wheel audio control switches by pulling on
steering wheel audio control switches to release the pawls.
: Pawl
CAUTION:
Do not tilt steering wheel audio control switches during
removal or damage may occur to the pawls.
INSTALLATION
Installation is in the reverse order of removal.
1. Steering wheel
2.
Steering wheel audio control switches
ALNIA0357ZZ
ALNIA1214ZZ
AV
BLUETOOTH CONTROL UNIT
AV-241
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITH AMPLIFIER]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000009482180
REMOVAL
NOTE:
Do not remove the RH front seat from the vehicle.
1. Remove the RH front seat bolts, disconnect the harness connectors from the RH front seat. Refer to
32, "Removal and Installation"
2. Tilt the RH front seat back to access the bluetooth control unit.
1.
Bluetooth control unit front bracket
2.
Bluetooth control unit/antenna
3.
Bluetooth control unit rear bracket
Front
ALNIA1069ZZ
AV-242
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITH AMPLIFIER]
BLUETOOTH CONTROL UNIT
3. Disconnect the harness connector (B) from the Bluetooth control
unit.
4. Remove the Bluetooth control unit screws (A), then remove the
Bluetooth control unit assembly (1).
5. Remove the Bluetooth control unit bracket screws and Bluetooth
control unit front and rear brackets.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA1812ZZ
AV
MICROPHONE
AV-243
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITH AMPLIFIER]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
MICROPHONE
Removal and Installation
INFOID:0000000009482181
REMOVAL
1. Remove the roof console. Refer to
INT-25, "Removal and Installation"
.
2. Release the pawls that retain the Bluetooth microphone (1) to
the roof console.
3. Disconnect the harness connector (A) from the Bluetooth micro-
phone (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA2931ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст