Nissan Frontier. Instruction — part 961
IP-24
< REMOVAL AND INSTALLATION >
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
Removal and Installation
INFOID:0000000009478558
REMOVAL
1. Remove front pillar lower finisher (RH). Refer to
INT-19, "Removal and Installation"
2. Remove instrument lower panel RH screws.
3. Remove instrument lower panel RH and lower glove box assembly.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Install upper glove box before installing lower glove box if both have been removed.
SHIFT SELECTOR FINISHER
IP-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
SHIFT SELECTOR FINISHER
Removal and Installation
INFOID:0000000009478559
REMOVAL
1. Release the cup holder finisher clips using a suitable tool and remove.
2. Remove the shift selector handle (6MT: FS6R31A). Refer to
69, "Removal and Installation"
3. Release the shift slector finisher clips using a suitable tool and
remove.
: Front
: Metal clip
NOTE:
A/T shift selector finisher shown; M/T shift selector finisher simi-
lar.
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0664ZZ
IP-26
< REMOVAL AND INSTALLATION >
CENTER CONSOLE
CENTER CONSOLE
Removal and Installation
INFOID:0000000009478560
CENTER CONSOLE
Removal
1. Remove instrument lower panel RH and lower glove box assembly. Refer to
2. Release the cup holder finisher clips using a suitable tool and remove.
3. Remove the shift selector finisher. Refer to
IP-25, "Removal and Installation"
.
4. Remove center console screws, then lift center console rear base away from center console front base
while disconnecting harness connectors.
5. Disconnect remaining harness connectors from center console front base and remove.
Installation
Installation is in the reverse order of removal.
1.
Center console front base
2.
Center console rear base
Front
AWJIA0415ZZ
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
IP-27
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
Exploded View
INFOID:0000000009478561
Disassembly and Assembly
INFOID:0000000009478562
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
Disassembly
1. Remove fuse block cover.
2. Remove damper hook.
3. Remove lower glove box latch cover.
4. Remove lower glove box latch assembly.
Assembly
Assembly is in the reverse order of disassembly.
UPPER GLOVE BOX
Disassembly
1. Remove upper glove box lid screws.
2. Remove upper glove box lid.
1.
Upper glove box
2.
Upper glove box lid
3.
Instrument lower panel RH
4.
Fuse block cover
5.
Lower glove box latch assembly cover 6.
Lower glove box
7.
Lower glove box latch assembly
8.
Damper hook
9.
Lower glove box damper
WIIA1049E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст