Nissan Frontier. Instruction — part 1090
AXLE SHAFT
RAX-11
< SERVICE INFORMATION >
[C200]
C
E
F
G
H
I
J
K
L
M
A
B
RAX
N
O
P
17. Insert Tool into the new axle oil seal as a guide.
CAUTION:
When inserting axle shaft, be careful not to damage oil seal.
NOTE:
The split ends of the Tool must butt up together and not overlap
as shown.
18. Insert the axle shaft assembly. Tighten the axle shaft nuts evenly in a criss-cross pattern to specification.
• Remove the Tool when the axle shaft assembly is approximately 90% inserted to protect the new axle oil
seal.
19. Install the parking brake assembly on the back plate and torque member. Refer to
.
20. Install the rear brake caliper assembly. Refer to
BR-40, "Removal and Installation of Brake Caliper and
21. Install the wheel sensor into the axle case. Refer to
BRC-113, "Removal and Installation"
234, "Removal and Installation"
(Type 2).
22. Check rear differential gear oil level. Refer to
DLN-220, "Checking Differential Gear Oil"
23. Install the wheel and tire. Refer to
Tool number
: — (J-34296-1 part of J-46215)
WDIA0240E
Tool number
: — (J-34296-1 part of J-46215)
RAX-12
< SERVICE INFORMATION >
[C200]
AXLE BEARING
AXLE BEARING
Removal and Installation
INFOID:0000000009478710
The axle bearing must be replaced every time the axle shaft is removed and installed. Refer to
.
CAUTION:
Do not reuse the axle bearing.
AXLE OIL SEAL
RAX-13
< SERVICE INFORMATION >
[C200]
C
E
F
G
H
I
J
K
L
M
A
B
RAX
N
O
P
AXLE OIL SEAL
Removal and Installation
INFOID:0000000009478711
The axle oil seal must be replaced every time the axle shaft is removed and installed. Refer to
CAUTION:
Do not reuse the axle oil seal.
RAX-14
< SERVICE INFORMATION >
[C200]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Axle Specification
INFOID:0000000009478712
Unit: mm (in)
Shim Washers
INFOID:0000000009478713
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Axial end play
0 - 0.07 (0 - 0.003)
Snap ring to shim washer clearance
0.2 (0.008) or less
Snap ring outer diameter installed
47.5 (1.87) maximum
Total end play
0.02 - 0.15 (0.0008 - 0.0059)
Available shim washers
ID Paint Dot Color
Thickness
Part Number*
Pink
2.5 (0.098)
43086-EB08C
Black
2.4 (0.094)
43086-EB07C
Purple
2.3 (0.091)
43086-EB06C
Yellow
2.2 (0.087)
43086-EB05C
Green
2.1 (0.083)
43086-EB04C
Red
2.0 (0.079)
43086-EB03C
White
1.9 (0.075)
43086-EB02C
Blue
1.8 (0.071)
43086-EB01C
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст